B88069X0180T502

Series:	EC75X
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Voltage - DC Spark Over (Nom):	75V
Impulse Discharge Current (8/20µs):	5000A (5kA)
Tolerance:	±20%
Number of Poles:	2
Fail Short:	No
Mounting Type:	Through Hole
Package / Case:	Axial Cylinder

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters, commonly known as GDTs, are resistors designed to limit or absorb electrical surges. The primary purpose of GDT devices is to protect sensitive electronic equipment from high voltages caused by lightning strikes or other transient electrical events. GDTs contain a non-arcing, ceramic-like material, which is called porcelain, surrounding and separating two metal electrodes. When a surge of electricity is applied to the electrodes, the dielectric material breaks down, allowing current to flow through the GDT. This action limits the voltage across the device, protecting the connected equipment from damage. The B88069X0180T502 is an example of a GDT device. This particular GDT is rated for a maximum continuous operating voltage of 8kV, a peak pulse voltage of 18kV, and has a pulse current rating of 5kA (8x20μs). The device has an outer diameter of 20mm, and is installed in a plastic module with an M20 threaded bushing.The primary application of the B88069X0180T502 GDT is to protect sensitive electronic equipment from sustained over-voltage conditions or transient voltage events. This type of protection is becoming increasingly important, as lightning strikes and electromagnetic interference (EMI) are growing more common due to the increasing proliferation of electronics. This type of device can be used in a range of applications, from industrial control systems and telecommunications systems, to electronic medical equipment and automotive electronics. The working principle of the B88069X0180T502 GDT is simple. When an electrical surge enters the device, the high voltage causes the dielectric material to break down. This decreases the resistance across the device, allowing current to flow freely. The amount of current that can be safely conducted is limited by the peak pulse current rating of the device. The GDT then blocks any further increase in voltage, preventing the connected equipment from being damaged. In some applications, GDTs are used in combination with other surge protection components, such as metal oxide varistors (MOVs). In such cases, the GDT is used to limit the peak current, while the MOV is used to absorb the transient energy. This combination of components is often more effective than using either type of device alone.In conclusion, the B88069X0180T502 GDT is a highly reliable device that provides effective protection from sustained or transient voltage events. This type of protection is essential for many types of modern electronic systems, such as industrial control systems, medical equipment, and automotive electronics. It is commonly used in combination with other surge protection components to provide even greater protection from voltage surges.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description