B88069X1513T303

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDTs) are an essential feature of many electrical systems. They are designed to suppress surges and fault currents by providing a rapid-fire discharge mechanism that safely discharges the current over-voltages, thereby protecting the system components from permanent damage. The B88069X1513T303 GDT is a multi-stage design of such device, and is used in a broad spectrum of applications.

Structure and Design

The GDT is made up of two components: the silicon valve array and the end cups, which are housed in an epoxy-filled, gas-filled enclosure. The valve array consists of several stages, each with a diode, a spark gap, and a resistor. There is usually either four or six stages, depending on the desired application. The diode assists the spark gap, while the resistor allows current to flow. The end cups contain the electrodes, which are connected to the external circuit.

Application Fields

GDTs are widely used in various industrial and commercial sectors. In power transmission and distribution systems, GDTs are used to protect sensitive electronic equipment from high voltage surges. In lighting systems, they are used to protect against lightning strikes. In wireless systems, they are used to reduce radio frequency interference. In railways, they can be used to protect against over-voltages caused by track side power supply fluctuations.

Working Principle

The B88069X1513T303 GDT works by providing a rapid-fire discharge mechanism that safely discharges over-voltage currents before they can cause damage. When an over-voltage is detected, the silicon diode conducts the current across the spark gap, triggering an arc discharge. This arc causes the current to rapidly dissipate, while the resistor absorbs the residual energy. The process is repeated until the over-voltage is safely discharged.

Conclusion

The B88069X1513T303 GDT is a multi-stage surge protection device designed for use in a broad range of applications. It is made up of two components: the silicon valve array and the end cups, which are housed in an epoxy-filled, gas-filled enclosure. When an over-voltage is detected, the silicon diode conducts the current across the spark gap, triggering an arc discharge, which dissipates the energy before it can cause damage.

The specific data is subject to PDF, and the above content is for reference