B88069X5411S102

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas discharge tube arresters (GDT) are specialised electrical protection devices which are used to efficiently divert high voltage spikes or transient currents away from protected circuitry. The surge protection offered by GDTs is due to their ability to quench , or rapidly extinguish, voltage surges before they reach the protected equipment. An example of a GDT is the B88069X5411S102, which is used in numerous industries, particularly in the telecommunications sector. This article will explain the application field of the B88069X5411S102 and its working principle.

Application Field

The B88069X5411S102 is a type of Type 2 GDT that has been designed to provide surge protection from voltage transients such as lightning or electrostatic discharge. As such, it is ideally suited for use in industrial and commercial applications, in both indoor and outdoor locations. It can be used to protect a wide range of equipment, such as linear motors, controllers, data-processing equipment, and telephone circuits. As it is a Class-I GDT, it is designed to be mounted directly onto a surface, or in an enclosure, for the best possible protection.

The B88069X5411S102 offers outstanding protection from high-voltage transients, and is capable of diverting dangerous voltages away from equipment during surges of up to 14kV (in either single-phase or three-phase systems). It is also designed to be highly resistant to water and most other liquids, making it suitable for use in most environments. In addition, the GDT offers high levels of resistance to corrosion and mechanical wear and tear.

Working Principle

GDTs work by controlling the voltage reaching the protected circuitry. The B88069X5411S102 works by allowing a large amount of current to flow in an arc when the arrester is activated. This arc causes the current to dissipate into the air, releasing a large amount of energy and halting the voltage surge. In the B88069X5411S102, a unique design uses a combination of silicon-oxide filler and a metal oxide layer as its conducting surface. This combination provides a much higher level of current protection than traditional metal-oxide arresters.

When voltage spikes occur, the B88069X5411S102 is able to quickly sense the voltage increase and activate its protection mechanism. In doing so, it restricts the current flow to only a fraction of the original current, thus suppressing the surge. As the current is reduced, the energy released through the arc is also restrained, thus preventing any damage to the protected equipment.

Conclusion

As seen, the B88069X5411S102 is a highly advanced Class-I GDT that is designed to offer superior protection against dangerous voltage transients, such as lightning and electrostatic discharge. The unique design of the GDT ensures that it is capable of safely diverting high voltage surges away from equipment and preventing any damage from occurring. It is an ideal choice for industrial and commercial applications, both indoors and outdoors, and is highly resistant to water and most other liquids. In short, the B88069X5411S102 is an effective and reliable solution for protecting a wide range of equipment from voltage surges.

The specific data is subject to PDF, and the above content is for reference