Allicdata Part #: | BA10358-ND |
Manufacturer Part#: |
BA10358 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ROHM Semiconductor |
Short Description: | IC OPAMP GP 500KHZ 8DIP |
More Detail: | General Purpose Amplifier 2 Circuit 8-DIP |
DataSheet: | BA10358 Datasheet/PDF |
Quantity: | 1767 |
Voltage - Input Offset: | 2mV |
Base Part Number: | BA10358 |
Supplier Device Package: | 8-DIP |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -40°C ~ 85°C |
Voltage - Supply, Single/Dual (±): | 3 V ~ 32 V, ±1.5 V ~ 16 V |
Current - Output / Channel: | 20mA |
Current - Supply: | 700µA |
Series: | -- |
Current - Input Bias: | 45nA |
Gain Bandwidth Product: | 500kHz |
Slew Rate: | 0.2 V/µs |
Output Type: | -- |
Number of Circuits: | 2 |
Amplifier Type: | General Purpose |
Part Status: | Not For New Designs |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The BA10358 is an integrated circuit voltage amplifier commonly used in instrumentation, OP amps, and buffer amplifiers. It consists of a transistor (Q1), a high gain voltage amplifier stage, a high impedance pre-amplifier amplifier (Q2), a current-to-voltage converter (Q3), and a low impedance output driver. The BA10358 has a wide range of applications and is used in a variety of design scenarios.
The amplifier has two main operating modes, linear and non-linear. In linear mode, the signal is amplified in proportion to the input, producing an output signal that is identical to the input. The non-linear mode is used for audio applications, where the signal is amplified to a greater degree than in linear mode. The BA10358 can be used in both AC (Alternating Current) and DC (Direct Current) applications.
Instrumentation is one of the most common applications for the BA10358, as an amplifier can be used to increase the sensitivity of the instrument readings. The amplifier can be used to boost the input signal, enabling more accurate readings. The amplifier can be used in conjunction with pressure transducers which convert pressure into an electrical signal. By boosting the signal produced by the transducer, it is possible to obtain more accurate readings.
The BA10358 can also be used in audio applications, such as amplifying bass guitar signals. The amplifier is typically used in this application with a speaker and provides more gain than what would be obtained from a regular amplifier. It is also used to add distortion to the signal, providing a wide range of tonal options.
The BA10358 is also used in OP amps and buffer amplifiers. OP amps are used in amplifier circuits and provide an increased gain, so that the output signal is identical to that of the input. Buffer amplifiers are used to provide a low impedance output, which is then used to drive speakers. The BA10358 is used to increase the voltage gain and provide a low impedance output.
The BA10358 application field and working principle are fairly straightforward, but are very important in a range of applications. The amplifier is used to increase the sensitivity of instrument readings, in audio applications, and as an OP amp or buffer amplifier, making it an incredibly versatile component.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
BA10393F-E2 | ROHM Semicon... | -- | 1000 | IC COMPARATOR 2-CHANNEL S... |
BA10393 | ROHM Semicon... | -- | 2855 | IC COMPARATOR DUAL 18V DI... |
BA10339FV-E2 | ROHM Semicon... | -- | 2500 | IC COMPARATOR QUAD 18V SS... |
BA10339F-E2 | ROHM Semicon... | -- | 1000 | IC COMPARATOR QUAD 18V 14... |
JL02-8B-32-BA10PC8-F0-R | JAE Electron... | 44.46 $ | 1000 | CONN PLG HSG MALE 54PS IN... |
JL02-6B-32-BA10SC-F0-R | JAE Electron... | 25.35 $ | 1000 | CONN PLG HSG FMALE 54POS ... |
JL02-2A-32-BA10PC-F0-R | JAE Electron... | 11.87 $ | 1000 | CONN RCPT HSNG MALE 54POS... |
JL02-2A-32-BA10SC8-F0-R | JAE Electron... | 20.66 $ | 1000 | CONN RCPT HSG FMALE 54POS... |
BA10339 | ROHM Semicon... | -- | 586 | IC COMPARATOR QUAD 18V DI... |
BA10393N | ROHM Semicon... | 0.2 $ | 1000 | IC COMPARATOR DUAL 18V SI... |
JL02-8B-32-BA10PC-F0-R | JAE Electron... | 28.32 $ | 1000 | CONN PLG HSG MALE 54PS IN... |
BA10324AF-E2 | ROHM Semicon... | -- | 1000 | IC OPAMP DIFF 500KHZ 14SO... |
BA10358FV-E2 | ROHM Semicon... | -- | 1000 | IC OPAMP GP 500KHZ 8SSOPG... |
BA104WA1 | TE Connectiv... | 20.79 $ | 1000 | BA104WA1=RELAY |
BA10358F-E2 | ROHM Semicon... | -- | 2300 | IC OPAMP GP 500KHZ 8SOPGe... |
BA10358F-E1 | ROHM Semicon... | -- | 1000 | IC OPAMP GP 500KHZ 8SOPGe... |
BA10FP-E2 | ROHM Semicon... | -- | 2000 | IC REG LINEAR 10V 1A TO25... |
BA10T | ROHM Semicon... | -- | 201 | IC REG LINEAR 10V 1A TO22... |
BA10358 | ROHM Semicon... | -- | 1767 | IC OPAMP GP 500KHZ 8DIPGe... |
BA10358FJ-GE2 | ROHM Semicon... | 0.08 $ | 1000 | IC OPAMP STD GRD SENSE 8S... |
BA10324AFV-E2 | ROHM Semicon... | -- | 4887 | IC OPAMP DIFF 500KHZ 14SS... |
BA10324AFJ-GE2 | ROHM Semicon... | 0.16 $ | 1000 | IC OPAMP STD GRD SENSE 14... |
BA10324A | ROHM Semicon... | -- | 483 | IC OPAMP DIFF 500KHZ 14DI... |
BA10358N | ROHM Semicon... | 0.57 $ | 832 | IC OPAMP GP 500KHZ 8SIPGe... |
Ultra Precision Current Sense Amplifier ...
Operational Amplifiers - 4-Channel, 10MH...
IC OPAMP GP 600KHZ 8SOICGeneral Purpose ...
IC OPAMP VFB 150MHZ 8UMAXVoltage Feedbac...
IC OPAMP VFB 215MHZ SOT23-5Voltage Feedb...
IC OPAMP BUFFER 660MHZ 8SOICBuffer Ampli...