BA2901YF-CE2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BA2901YF-CE2 Comparator is a commonly used linear comparator widely used in electronics. It is a monolithic integrated circuit with a very low power consumption, which is suitable for the normal voltage of single and dual power supplies. Thanks to its CMOS technology, the BA2901YF-CE2 has superior reliability, superior noise-resistance, low power consumption and low heat generation.

The comparator contains two differential amplifiers and one output circuit, as well as a bias network and two phase compensation network in the circuit. It has two inputs, INH, INL, and two outputs, VOH, VOL. It can be connected to both positive and negative inputs, and it can resist the temperature drift and process small signal with greater accuracy. It also has a hysteresis voltage control circuit, which can make the comparator operate in a stable state. The comparator\'s output signal will remain constant unless the input signals exceed the threshold level.

The comparator can be used for signal conversion, signal amplification, signal shape processing, and level comparison. The most common application of the comparator is for zero-crossing detection. When the signal monitored by the comparator passes through 0, the zero-crossing detector will detect the signal change and then output a trigger signal. This trigger signal can trigger the timing and control circuits, so that the circuit can complete the synchronization, timing, and decision-making tasks.

The comparator can also be used as an analog-to-digital converter. When a signal enters the comparator, the comparator can make a comparison between the level of the signal and the reference level. If the signal level is higher than the reference level, the comparator will output a high level; if the signal level is lower than the reference level, the comparator will output a low level. This output is then used to obtain the digital value of the analog signal.

The comparator can also be used as a limit comparator or a peak detector for determining an upper or lower limit of a signal. When the signal monitored by the comparator exceeds the threshold, the comparator output can be set to a high level. The comparator can also be used as an oscillator, as when the comparator output is fed back, it can produce periodic output signals.

The BA2901YF-CE2 is a very useful linear comparator, as it has many applications in electronics. It has a number of advantages, such as its low power consumption and low heat generation, and its stability against temperature drift. It is a reliable and versatile comparator, and is well suited for a wide range of applications, including signal processing, analog-to-digital conversion, and data detection.

The specific data is subject to PDF, and the above content is for reference