BAS281-GS08

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electronic components commonly used in analog and digital circuits to provide a variety of electrical characteristics. They are typically constructed of two pieces of semiconductor materials, one type of which (the anode) exhibits a positive charge when energized, and the other (cathode) a negative charge. When a forward voltage is applied, the diode will conduct current and allow a flow of electrons through the junction. Conversely, when the reverse voltage is applied, the diode will prevent current flow through the junction and can be used to block the passage of electric current from flowing in the wrong direction. In the world of electronics, there is an increasing need for this type of component, known as the rectifier.

BAS281-GS08 is a type of single rectifier diode that is specifically designed to operate in high efficiency and high current applications. The BAS281-GS08 features a maximum forward voltage of 1.2V and a maximum reverse voltage of 5V, with a range of typical surge currents up to 1.5A. It is primarily used to protect and control power. When properly applied, it can help control the power flow from a power source to the device and provide protection from over-voltage and over-current conditions in both directions.

The working principle of the BAS281-GS08 is quite simple. When a forward voltage is applied, the diode will conduct current and allow a flow of electrons to pass through the junction – which effectively creates a ‘clamping’ action on the power line. The forward voltage can be adjusted to provide the desired clamping voltage. If the forward voltage is too low, the diode will still conduct current, but not at its full potential. Conversely, if the forward voltage is too high, the diode can ‘burn out’ due to excessive heat.

The reverse voltage is also important to understand, as it influences the flow of current in the opposite direction. When the reverse voltage is applied, the diode will prevent current flow through the junction and can be used to block the passage of electric current from flowing in the wrong direction. In the opposite case, when the reverse voltage is too low, the diode may still allow some current to pass, but it may not be sufficient to protect the device.

The BAS281-GS08 single rectifier diode offers many advantages for use in modern electrical devices. It is important to understand the limitations of the diode before attempting any type of installation, as improper application can result in unreliable performance and even a potential hazard. The diode is also a great choice for applications that require a reliable and efficient protection from over-voltage and over-current.

The specific data is subject to PDF, and the above content is for reference