BCR08AM-14A-A6#B00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are vacuum-sealed solid-state semiconductor switches that control current and voltage. A thyristor is a three-terminal device composed of two bi-directionally conducting regions separated by a semiconductor barrier that requires two conditions to be satisfied simultaneously in order to turn the device on. Preference is given to the generic name thyristor, over the name 4-layer diode, which refers to the physical structure of the device.

TRIACs are a type of thyristor known as three-terminal ac switches. It has three terminals, an anode, a cathode and a gate, and has the same semiconductor structure as a thyristor, but each of the three terminals can control the current flow in both directions between the anode and the cathode. TRIACs are popular in applications that need to measure or control power in AC circuits.

BCR08AM-14A-A6#B00 is a popular TRIAC in market. It mainly used for power control and safety module. It is suitable for applications in photovoltaic energy conversion system and motor speed control. The low on-state resistance makes it capable of dissipating small amount of heat. The thermal protection function can ensure the normal operation of the module and make it safe to use.

This TRIAC is a four-quadrant type, which means the load will draw the same current in either direction. The device offers two symmetrical quadrants, each with a Gate under voltage protected by a PET (photovoltaic effect temperature) current at the trigger terminal. The operating temperature range of this device is -40°C to 175°C.

The working principle of BCR08AM-14A-A6#B00 is relatively simple. When a current passes through the gate terminal of the TRIAC, it triggers the initial formation of a conductive channel. This current is maintained for as long as the gate terminal of the TRIAC is biased. Once the current passes through the TRIAC, it allows current to flow from the Anode to the Cathode in the forward direction, completing the circuit.

Once the current is interrupted at the Gate terminal, the TRIAC is reset and ready to go again. In this way, the TRIAC can be used to switch the AC current, regulating the two halves of the AC cycle and so varying the power delivered to the load. This makes it suitable for use in applications such as appliance, lighting, power control and safety circuits.

BCR08AM-14A-A6#B00 is a versatile Thyristors - TRIACs with superior performance. Its wide operating temperature range and low on-state resistance make it an excellent choice for the various applications mentioned above. Its simple working principle and gate control scheme make it perfect for controlling AC power with minimal effort.

The specific data is subject to PDF, and the above content is for reference