BD18KA5WFP-E2 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BD18KA5WFP-E2 is a linear voltage regulator from ROHM Semiconductor, which is mainly applied in portable devices and consumer electronics. This voltage regulator integrates a low dropout regulator and P-channel MOSFET to provide excellent load transient response and low dropout voltage. With a device area at 0.99mm x 1.36mm, it helps to reduce the total device footprint.

BD18KA5WFP-E2 device can be used to provide a fixed output voltage, with good electrical performance, such as excellent load transient response, low dropout voltage and good load regulation. It is suitable for applications that require an output voltage range of 1.2 V to 5.0 V, with adjustable temperature stability and built-in current limit. It offers a wide range of power supplies that can be used for embedded applications, such as portable devices and consumer electronics.

BD18KA5WFP-E2 voltage regulator operates on a simple linear principle: current from the input is directed through an external resistor to set the output voltage. To ensure the accuracy of the output voltage, the reference voltage of the BD18KA5WFP-E2 should be externally trimmed. The output voltage of the device is determined by the divider ratio of the external resistors, the values of which can be calculated by the following equations:

VOUT = VREF (1 + R2/R1).

The power supply circuit of the BD18KA5WFP-E2 includes the input voltage source, output voltage source, two external resistors, and two capacitors. One of the capacitors is used to filter the output voltage, while the other capacitor should be connected between the Enable pin of the device and ground to activate the power supply circuit.

The device has two operational modes, normal mode and low-dropout mode. The normal mode is an automatic current limiting mode, in which the current flow is limited to a value that is predetermined by the internal circuitry. The low-dropout mode allows the output voltage to drop below the reference voltage of the device. By using these two modes, it is possible to provide a regulated output voltage with low dropout current.

BD18KA5WFP-E2 voltage regulator features overload protection, thermal overload protection and overcurrent protection. It is also equipped with an enable pin so that the device can be deferred until its reference output voltage is reach. With a power supply voltage range of 3.0 V to 12.0 V, it can provide a stable output voltage for most portable applications. The device also provides an adjustable temperature stability to ensure a reliable voltage output.

In conclusion, the BD18KA5WFP-E2 linear voltage regulator from ROHM Semiconductor is a cost-effective solution for providing a regulated output voltage for most portable applications. With excellent electrical performance, such as excellent load transient response and low dropout voltage, the device offers a wide range of power supplies that can be used in embedded applications. It also features protection mechanisms, adjustable temperature stability, and an enable pin. All these features make the BD18KA5WFP-E2 a reliable and efficient choice for providing power to portable device and consumer electronics.

The specific data is subject to PDF, and the above content is for reference