BGA2850,115 RF/IF and RFID

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Frequency:	0Hz ~ 2.2GHz
P1dB:	-2dBm
Gain:	22.9dB
Noise Figure:	4dB
RF Type:	General Purpose
Voltage - Supply:	4.5 V ~ 5.5 V
Current - Supply:	36mA
Test Frequency:	2.15GHz
Package / Case:	6-TSSOP, SC-88, SOT-363
Supplier Device Package:	6-TSSOP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Amplifiers refer to amplifiers that can amplify the amplitude of an RF signal, which is the type of signal that is used in radio frequency applications. This type of amplifier operates by using a combination of components such as transistors, resistors, capacitors, inductors, diodes and other passive components. The design of the circuit is tailored according to the application in which the amplifier is used. Some of the most common types of RF amplifiers are Low Noise Amplifier (LNA), High Frequency Amplifier (HFA), Gain Block Amplifier (GBA), and combiners. One type of RF amplifier is the BGA2850,115. This amplifier was designed by OHIO DSP, a Japanese company, and was developed for use in the commercial radio frequency market. It is designed to provide a wide range of gain, which is adjustable from 5 to 115 dB. The main purpose of the BGA2850,115 is to amplify the signal of an antenna and provide the necessary gain for the application. The BGA2850,115 has a number of applications including:• Radio Transmitters: The BGA2850,115 can be used to amplify and transmit voice and data signals for a variety of radio applications. This range of gain allows the user to adjust the signal strength and range as required.• RF Receivers: The BGA2850,115 is also used as a gain block in radio receivers to amplify weak radio signals. This allows the receiver to be able to discriminate between signals of different frequencies in order to distinguish what is being transmitted.• Digital Modulator: The BGA2850,115 can also be used as a digital modulator which is used to convert analog signals into digital data signals. This can be used in digital equipment such as HDTVs and other digital receivers to enable them to receive the signal. The BGA2850,115 operates using voltage gain, which means that it amplifies an input signal by increasing the voltage. This is achieved by increasing the current through a transistor or other active device. The gain of the amplifier can be adjusted by altering the biasing applied to the transistor or other active device. The BGA2850,115 also has a number of features such as a low noise figure, low distortion for clear radio frequency signals, and good linearity over a broad frequency range. In order to ensure that the BGA2850,115 performs correctly, it must be accurately tuned. This tuning must be done prior to installation and will involve setting certain control parameters such as the gain, the input and output impedances, and the frequency response. Once the amplifier has been correctly tuned, it can be used in its intended application. The BGA2850,115 is designed to provide an efficient and reliable performance in a variety of applications. It is able to provide a wide range of gain, which can then be adjusted by tuning the device. It also has a wide frequency response and a low noise figure, making it suitable for a variety of RF applications. The BGA2850,115 is an ideal choice for those looking for an effective and reliable solution for amplifying RF signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description