BGM1043N7E6327XUSA1 RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Amplifiers

BGM1043N7E6327XUSA1 is an amplifier designed to provide RF amplification with high linearity and high gain. It is a wideband amplifier designed for frequencies from 10 kHz to 100 MHz and offers up to 60 dBm of output power over a 32 dB power range. The device can be used as a wideband amplifier and offers excellent IMD performance on 3rd and 5th order products. This amplifier also provides excellent input and output matching, power gain, high IP3, and low noise figure.

The BGM1043N7E6327XUSA1 can be used in multiple RF amplifying applications. Some of its application fields are cellular base station, GPS receiver, and FM radio broadcast receiver. It can also be used in WiMAX, 4G, and LTE networks. One of the main features of BGM1043N7E6327XUSA1 is its high linearity which ensures that the amplified signal has no distortion. This amplifier can also be used in high frequency communications and other wireless applications, as well as amplifying signals from low noise sources.

The amplifier design is based on two stages of discrete transistors. The inputs are internally matched to 50 ohms and the outputs are internally matched to 50 ohms. The device has a power gain of over 65 dB and excellent distortion performance including IMD. The BGM1043N7E6327XUSA1 has the capability to provide low distortion and high stability. It has an input return loss of greater than 18 dB over the entire frequency range, and an output return loss greater than 20 dB. The input and output impedances of this device are matched to 50 ohms.

BGM1043N7E6327XUSA1 also has very good temperature stability and balanced single-ended operation. This amplifier is also designed for lower noise operation. Its RF output noise figure measures around 2.3dB for a nominal supply voltage of 30V. This reduces the distortion in the amplifier and enables it to provide excellent signal fidelity.

The BGM1043N7E6327XUSA1 can also be used for gain and flatness. The gain is good, with less than 1dB variation over the entire frequency range. This is due to the high linearity of the amplifier, which ensures that the gain is more linear and distortion less than 0.10dB. The DC power of the amplifier can be set with a potentiometer, and it can also be configured for different bias voltages.

The BGM1043N7E6327XUSA1 can provide high quality RF amplification. It is a reliable, high performance amplifier, designed for use in wide range of RF amplifying applications. Its low noise performance and high linearity ensure that the signal is amplified with minimal distortion. This amplifier can be used for both low noise and high power applications, and provides excellent gain flatness and temperature stability.

The specific data is subject to PDF, and the above content is for reference