BGU6005/N2X RF/IF and RFID |
|
Allicdata Part #: | 568-14526-2-ND |
Manufacturer Part#: |
BGU6005/N2X |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | NXP USA Inc |
Short Description: | IC AMP RF LNA MMIC 6XSON |
More Detail: | RF Amplifier IC Galileo, GLONASS, GPS 1.559GHz ~ 1... |
DataSheet: | BGU6005/N2X Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Frequency: | 1.559GHz ~ 1.61GHz |
P1dB: | -- |
Gain: | 17dB ~ 17.5dB |
Noise Figure: | 0.85dB |
RF Type: | Galileo, GLONASS, GPS |
Voltage - Supply: | 1.5 V ~ 3.1 V |
Current - Supply: | 5.2mA |
Test Frequency: | 1.559GHz ~ 1.61GHz |
Package / Case: | 6-XFDFN |
Supplier Device Package: | 6-XSON, SOT886 (1.45x1) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF amplifiers are electronic devices that are used to design complex electronic systems. They are equipped with transistors, which act as switches that can be turned on or off depending on the signals they receive. The BGU6005/N2X is a type of RF amplifier that has been used in many applications. It is designed to be a high-speed, low-noise amplifier with a wide bandwidth.
The BGU6005/N2X is designed to operate in a wide frequency range, typically from DC to 5GHz. This wideband characteristic makes it very versatile and suitable for a variety of applications. It is frequently used in communication systems, such as Wi-Fi, Bluetooth, and mobile phone systems, due to its wide frequency range and high-speed characteristics. It is also used in military and aerospace applications for its high-frequency response, low-noise characteristics, and wide dynamic range.
The working principle of the BGU6005/N2X is quite simple. It is essentially an amplifier that uses two transistors to amplify the signals it receives. The two transistors are arranged in a common emitter configuration, where one is the primary and the other is the secondary. When an input signal is supplied to the primary, it is amplified by the BGU6005/N2X circuit. This amplified signal is then passed on to the secondary, which then amplifies the signal further. The amplified signal is then sent back out to the output, where it can be used by the system.
The BGU6005/N2X also has two added features. These features are the gain control and the attenuator. The gain control feature allows the user to adjust the amplitude of the output signal by altering the gain of the amplifier’s stages. The attenuator feature provides a way to reduce the amplitude of the signal without affecting its frequency. This is useful for applications where the signal’s amplitude needs to be adjusted in order to improve the system’s performance.
The BGU6005/N2X is a highly versatile amplifier, suitable for applications such as communication and military/aerospace systems. It offers a wide frequency range, low-noise characteristics, and wide dynamic range. It also provides gain control and attenuation features, which allow the user to fine-tune the amplifier’s performance for their specific application.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
BGU6102,147 | NXP USA Inc | 0.25 $ | 5000 | IC AMP MMIC WIDEBAND 6HXS... |
BGU6101,147 | NXP USA Inc | 0.6 $ | 4740 | IC AMP MMIC WIDEBAND 6HXS... |
BGU6009/N2X | NXP USA Inc | -- | 1000 | IC AMP RF LNA MMIC 6XSONR... |
BGU6005/N2X | NXP USA Inc | -- | 1000 | IC AMP RF LNA MMIC 6XSONR... |
BGU6104,147 | NXP USA Inc | 0.22 $ | 5000 | IC AMP MMIC WIDEBAND 6HXS... |
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...