BM1R16MV1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Time Delay Relays (TDR) are used in electronic and electrical circuits to provide a delayed response to a certain signal. They are used for applications such as providing a delay before an electric pump, motor, or solenoid engages, or provide protection for motors against over-current and short circuits. The BM1R16MV1 is a specific type of TDR that is designed to provide a different response time for a specific set of conditions.

The BM1R16MV1 is a 16mm time delay relay with a voltage range of 12VDC to 230VAC, and a maximum load of 8A/230VAC. The delay times for the BM1R16MV1 range from 0.1s to 60 minutes. It has both a normally open and normally closed output contact and features an LED indication of when the output contact is closed. The BM1R16MV1 is equipped with an adjustable time knob, which can be used to adjust the delay time of operation. It also has a PCB four-pin connector for easy installation and wiring.

The working principle of the BM1R16MV1 is based on the circuit principle of limited field current operation. When the voltage is applied to the relay, the magnetic field built around the coil is proportional to the current passing through the coil. This magnetic field keeps the normally closed output contact in the “on” position until the current passing through the coil is reduced to a level below that required to sustain the magnetic field. At this point, the output contact “breaks” and the timer’s delay begins. The timer is preset so that it will not operate again until the current through the coil reaches the level required to re-establish the magnetic field.

The BM1R16MV1 time delay relay has a variety of applications. It can be used as an electrical motor protection device, providing a time delay before energizing the motor to prevent it from over-current or short circuit damage. It can also be used to provide a time delay for an electric pump or solenoid, ensuring that the pump or solenoid is not engaged before the full voltage is available. The BM1R16MV1 can also be used in energy saving applications, where the time delay can be set to only energize the circuit when a particular level of load is needed.

In summary, the BM1R16MV1 is a type of Time Delay Relay (TDR) designed to provide a range of delay times and adjustable time knob for a variety of applications. It uses an adjustable time knob and the principle of limited field current operation to provide a delayed response to a certain signal. The BM1R16MV1 has a voltage range of 12VDC to 230VAC and a maximum load of 8A/230VAC, making it suitable for a range of applications, such as motor protection, time delays for pumps and solenoids, and energy saving applications.

The specific data is subject to PDF, and the above content is for reference