BR24C08-WDS6TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BR24C08-WDS6TP is a widely used memory component for many electronic device applications. It is typically used in portable devices such as cell phones, PDAs and digital cameras, in order to not consume too much power and maximize battery life.

After analyzing the BR24C08-WDS6TP component, it is clear that it is a memory component, as it reads and stores up to 8Kbits of binary data. The component mainly consists of 256 bytes of EEPROM, 8Kbit EEPROM array and its associated decoding logic, which can be assumed to provide data storage and the associated controller circuits.

The BR24C08-WDS6TP component is made up of a Serial Interface, 8Kbit EEPROM array and its associated decoding logic, and a serial EEPROM array. The component has a three-wire Serial Interface. It requires only two power supplies, which are VCC and VSS. The component can be operated by a serial clock from the control logic, allowing writing and reading access to the array. The component also has a serial data input/output pin for data transmission.

The component can write, read and erase binary data from the 8Kbit EEPROM array. It can store up to 256 bytes of information. The 8Kbit EEPROM offers capability to write and erase the data up to 100K times.

The working principle of the BR24C08-WDS6TP is based on the concept of memory cells. Each memory cell consists of a single transistor and capacitor. A voltage is applied to the transistor and the capacitor charges or discharges depending on the voltage applied. By varying the voltage applied to the memory cell, it is possible to store a binary value in the memory cell.

The component also includes an associated decoding logic circuit. This circuit is responsible for identifying the address signals of the memory cells and output a valid write/read or erase signal to the memory cells.

In summary, the BR24C08-WDS6TP is a widely used memory component for digital device applications. It is mainly made up of a serial interface, 8Kbit EEPROM array, decoding logic, and serial EEPROM array. It can store up to 256 bytes of data and has a data input/output pin. The component also has a three-wire serial interface and requires two power supplies for operation. The component operates based on the concept of memory cells and its associated decoding logic.

The specific data is subject to PDF, and the above content is for reference