BT138-600-0Q

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are a type of active semiconductor device, commonly known as a solid state switch, which is used in power control, switching and regulation circuits. The BT138-600-0Q is an example of a triac, which is a type of thyristor used in the regulation of AC power. The BT138-600-0Q is a general purpose triac designed to control low power AC loads in applications such as domestic and industrial lighting, heating and ventilation. It is an economical, zero voltage switching device that is suitable for applications ranging from 10-600V, 2-16A.

Triacs are commonly used in lighting, heating, ventilation and other AC power control applications, allowing the AC load to be switched on and off or varied in power or speed. The triac is a bidirectional, three-terminal, four-layer device. It consists of one main terminal and two gate terminals, which control the flow of current between the main terminals. Triacs can be controlled both by a DC control signal and an AC signal on the gate terminals.

The BT138-600-0Q is an economical, low-power, low-voltage triac ideal for applications such as switching and regulating AC power. It has a BTA isolation rating and a maximum forward blocking voltage of 600V, making it suitable for AC loads up to 16 Amps. The BT138-600-0Q features low gate current, fast turn-on and off times and low forward voltage drop.

The working principle of the BT138-600-0Q is based on the principle of the thyristor. The triac consists of two oppositely symmetrical thyristors. When both the gate terminal and the main terminal of the triac are connected to the line voltage, current will flow from the main terminal to the gate terminal. The control circuit must be capable of delivering sufficient current to the gate terminal to turn on both thyristors in synchronous conduction and allow AC current to flow.

The BT138-600-0Q can be used in a variety of applications ranging from phase and speed control of motors, phase dimming of lamps, temperature and process control, similar to the phase control SCR devices. It is also used in current limiting and power factor correction, AC switching relays, AC motor starters, switching regulators, and AC to AC, AC to DC and DC to AC converters. Additionally, the BT138-600-0Q features low switching times, low forward voltage drop and low RMS eight losses, making it ideal for low power, low voltage applications.

In conclusion, the BT138-600-0Q is a general purpose triac suitable for applications ranging from 10-600V, 2-16A, offering excellent cost-performance for domestic and industrial lighting, heating and ventilation automation. The triac works on the principle of two oppositely symmetrical thyristors that can be controlled by a DC control signal and an AC signal on the gate terminal. It has fast turn-on and off times, low forward voltage drop and low RMS eight losses. It is suitable for low power and low voltage applications, such as current limiting and power factor correction, AC switching relays, AC motor starters and switching regulators.

The specific data is subject to PDF, and the above content is for reference