BT138X-600F/L01Q

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Standard
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	12A
Voltage - Gate Trigger (Vgt) (Max):	1V
Current - Non Rep. Surge 50, 60Hz (Itsm):	95A, 105A
Current - Gate Trigger (Igt) (Max):	70mA
Current - Hold (Ih) (Max):	30mA
Configuration:	Single
Operating Temperature:	125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3 Full Pack, Isolated Tab
Supplier Device Package:	TO-220F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Thyristors - TRIACs are a type of semiconductor device, also known as a triode for alternating current (TRIAC). A TRIAC is an electronic component which allows current to flow when a voltage of a certain magnitude is applied across it, in either direction. They are widely used where only AC circuits are available, as they provide a means of controlling the current and voltage levels in the circuit. The BT138X-600F/L01Q is a TRIAC which is designed to switch current at high voltages and current levels.

Applications

The BT138X-600F/L01Q has a wide range of applications. It is used in power supplies, heating and lighting control, motor control, industrial automation, appliance control and many other circuits.The most common application of a BT138X-600F/L01Q is as an on/off switch for an AC circuit. It is typically used in circuits where the load must be switched on at a specific voltage and current level. By using the BT138X-600F/L01Q, the load’s current and voltage can be precisely controlled. This makes it the ideal choice for applications such as dimming lights, heating and cooling control, and motor control. The BT138X-600F/L01Q can also be used for phase control applications. This involves controlling the phase angle of the switch’s output so that it is at the desired angle for the load. There are many applications which require the use of a TRIAC in this way, such as controlling the speed of an electric motor or the brightness of a bulb.

Working Principle

The BT138X-600F/L01Q is a four terminal device, with three of the terminals being the anode, gate and cathode respectively. When a voltage is applied to the anode and a control voltage is applied to the gate, the TRIAC conducts current across the anode and cathode terminals. The operation of the BT138X-600F/L01Q is based on the principle of minority carrier injection. When the gate voltage exceeds the voltage at the anode by a certain amount, the gate automatically draws a small number of minority carriers from the anode. This causes a current to flow across the device, and the current increases proportionally to the gate voltage. The BT138X-600F/L01Q is designed to operate over a wide range of voltages, current levels and temperatures, making it a versatile device for many applications. It is also designed to be immune to transients and overvoltage, which makes it an ideal choice for applications where there is a risk of electric shock or damage to the circuit components.

Conclusion

The BT138X-600F/L01Q is a versatile TRIAC which is used to control current and voltage in AC circuits. It is suitable for a range of applications, including switching and phase control. The BT138X-600F/L01Q is designed to operate over a wide range of voltages, current levels and temperatures, and is immune to transients and overvoltage. This makes it a reliable and safe choice for applications requiring precise control of current and voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description