BTA310X-600E,127

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Standard
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	10A
Voltage - Gate Trigger (Vgt) (Max):	1.5V
Current - Non Rep. Surge 50, 60Hz (Itsm):	85A, 93A
Current - Gate Trigger (Igt) (Max):	10mA
Current - Hold (Ih) (Max):	15mA
Configuration:	Single
Operating Temperature:	125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3 Full Pack, Isolated Tab
Supplier Device Package:	TO-220F
Base Part Number:	BTA310-600

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs

Thyristors - TRIACs are an important component of electronic circuits and are widely used in power control applications. The BTA310X-600E,127 is one type of TRIACs (triode for alternating current), which is a three-terminal semiconductor device mainly used for switching or controlling high power AC loads. It is a type of switch that can be triggered by either positive or negative gate current.The BTA310X-600E,127 is a three-terminal semiconductor device composed of four layers of alternating P-type and N-type material. It consists of two thyristors connected in series with opposite polarity, the anode of one being connected to the cathode of the other. The terminals of the thyristors are designated as Anode (A), Gate (G), and Cathode (C). The gate of the TRIAC controls the main current flow into the TRIAC.The BTA310X-600E,127 has a wide range of applications in areas such as lighting control systems, home automation systems, remote control applications, and motor speed control systems. It can be used for on/off control in lighting circuits, AC motors, and any other electronic application that requires AC current control.The main mechanism behind the operation of the BTA310X-600E,127 is when a current of appropriate value and polarity is applied between gate and cathode, it effectively turns on the TRIAC, allowing current to flow through its main terminals. The same trigger current can also be reversed to turn the TRIAC off. This is an important enabling factor that allows switching of AC loads using a DC source.Additionally, when the gate current is removed, the BTA310X-600E,127 will remain in a latched state allowing reactive loads, such as motors and solenoids, to be switched on and off without needing to constantly provide a gate current.The BTA310X-600E,127 can also be used to adjust the speed of AC motors by controlling the supply voltage. This is achieved by varying the amount of time that the TRIAC is "on" or "off" with respect to the AC supply voltage waveform. This feature allows precision control over the level of torque delivered by the AC motor, which is invaluable in applications where precise speed control is required.To help reduce power losses associated with introducing high currents into the TRIAC, the BTA310X-600E,127 has an integrated snubber circuit that helps to reduce transient and noise voltages generated during switching. This also helps to extend the thyristor\'s lifetime.Overall, the BTA310X-600E,127 is a versatile and reliable thyristor that can be used for a wide range of applications including lighting control, AC motors and other electronic application requiring AC current control. It offers excellent switching characteristics, low triggering voltage and current, and protection from transient and noise voltages. As such, it is a popular choice for electronic device designers and is well suited for high power applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description