BTA410Y-600CT,127

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Standard
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	10A
Voltage - Gate Trigger (Vgt) (Max):	1.5V
Current - Non Rep. Surge 50, 60Hz (Itsm):	100A, 110A
Current - Gate Trigger (Igt) (Max):	35mA
Current - Hold (Ih) (Max):	35mA
Configuration:	Single
Operating Temperature:	150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3 Isolated Tab
Supplier Device Package:	TO-220AB
Base Part Number:	BTA410-600

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs are a type of semiconductor device commonly used as an electronic switch. They are also referred to as bi-directional thyristors. The BTA410Y-600CT,127 is a four-quadrant TRIAC that is used for special applications such as motor control, lamp dimming and energy measurement.The BTA410Y-600CT,127 is a 600V, 4A TRIAC. It can be used for both AC and DC applications where the current does not exceed 4A. It is also very commonly used for lamp dimming, as it provides a smooth dimming of the lighting, even down to very low levels.To better understand how the BTA410Y-600CT,127 works, it is important to first look at the operating principle of TRIACs. A TRIAC is similar to a normal switch and is used to switch AC current. It contains two SCRs (silicon-controlled rectifiers) and a diac, connected in parallel. The diac controls the gate current, which is the current that the SCRs allow to flow between their terminals.When the diac is forward-biased, the SCRs allow current to flow between the terminals. This then creates a low-impedance path between the two, allowing the current to flow. When the diac is reverse-biased, the current is blocked, and the SCRs are effectively turned off. Therefore, a TRIAC can be used to control the current in both directions.The BTA410Y-600CT,127 is most commonly used for motor control, as it provides very precise control of the motor, allowing for accurate and linear motion control. It is also used for lamp dimming, as it provides a smooth and efficient transition from dark to light. The BTA410Y-600CT,127 can also be used in energy measurement applications, as it is capable of accurately measuring the voltage and current of the system, allowing for efficient monitoring of the energy usage.The BTA410Y-600CT,127 is a very versatile device, as it can be used in a variety of applications. It is robust, reliable and provides precise control of the current and voltage, making it an ideal choice for a wide range of applications. Thus, making it the perfect choice for motors, lighting and energy measurement applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description