BU1010-M3/51

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers are used in many electrical and electronic applications, including power supplies and amplifiers. The BU1010-M3/51 rectifier bridge is a four-terminal, stable, full wave rectifier bridge comprised of four pre-molded bridges and four diodes.

The BU1010-M3/51 rectifier bridge features good rectification performance, high precision rectifying effect, and a low reverse leakage current. Designed for general applications, the BU1010-M3/51 allows for an unregulated power supply input voltage range of < 90 V dc to 1,000 V dc and an operating temperature range of -40°C to +125°C.

The BU1010-M3/51 rectifier bridge converts alternating current into direct current by first disconnecting the AC input signal, then attenuating the signal, and finally rectifying the signal with positive and negative polarity. The four diodes in the rectifier are connected in a bridge configuration to convert the AC voltage into an unregulated DC voltage. This DC voltage is then used to power the application or device.

The BU1010-M3/51 rectifier bridge circuit consists of four rectifying diodes connected in opposite pairs, with each semiconductor component separated and connected as part of a single bridge by connecting the junction of two diodes and forming a semiconductor loop. This bridge rectifier circuit can also be referred to as a “crossed arms” rectification circuit.

This bridge configuration allows for the alternating current to be lifted up onto both sides in the same direction, allowing for the majority of the electromagnetic interference to be filtered out. This creates a more efficient and reliable rectification process for power supplies and amplifiers. Additionally, the bridge rectifier’s four terminals connect all four diodes in a single component, allowing for the circuit to be easily integrated.

The BU1010-M3/51 rectifier bridge is capable of supplying an adjustable output voltage, with the addition of a resistor, inductor, and/or capacitor. This allows devices, such as amplifiers and power supplies, to easily adjust the output voltage when desired, creating a more efficient and adjustable power supply solution.

The BU1010-M3/51 rectifier bridge’s compact design, high efficiency, and adjustable output voltage makes it an ideal solution for many electronic and electrical applications, such as switched mode power supplies, DC motor speed control, power warehouses, computer electronics, and more. Additionally, the BU1010-M3/51 has been tested for ESD protection, surge overload, and environmental performance, making it a highly reliable and dependable component for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference