BZD17C220P M2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BZD17C220P M2G is a diode that belongs to the category of single Zener diodes. A diode is any two-terminal electronic component with asymmetric electrical behavior. When it is forward-biased (or biased in the forward direction), it will act like a voltage-controlled resistor, allowing current to pass in one direction while blocking current in the reverse direction. Zener diodes are a specialized type of diode that is designed to allow current to flow in the reverse direction if the voltage is greater than a certain level. Single Zener diodes are designed to work in a circumstances where only one breakdown voltage is needed.

The primary application of the BZD17C220P M2G is for voltage regulation. It is designed to ensure a steady voltage is present in a circuit, which is especially important for electronic devices. The device has a breakdown voltage that is specified at 220V with a maximum rated power of 500 milliwatts. This indicates that it is an ideal choice for use in lower powered devices.

In terms of its working principle, the BZD17C220P M2G operates in a similar manner to a regular diode. When the voltage across it is less than the specified breakdown voltage, the diode exhibits a high resistance state, allowing only a minimal amount of current to flow through it. As the voltage across it increases, the zener diode begins to \'breakdown\', allowing a larger amount of current to flow through it. This process is referred to as Zener breakdown. The BZD17C220P M2G is designed to ensure a steady voltage is maintained in a circuit, even when the current draw on the device is varying.

The BZD17C220P M2G is a single zone diode, meaning that it is designed to breakdown at only one voltage point. This makes it a suitable choice for applications where a single breakdown voltage is required. It is suitable for use in a wide range of electronic devices, particularly those that require a steady voltage to function properly.

The BZD17C220P M2G is designed to be used in circuits that require low power consumption. Because it is designed to breakdown at lower voltage levels, it requires very little energy to keep the voltage level stable. Additionally, it is rated to withstand up to 500 milliwatts of power, meaning that it can be used in applications that require a small current draw. This makes it an ideal choice for a wide range of consumer electronics.

The BZD17C220P M2G is an ideal choice for applications that require a steady, low-power voltage source. Its single-breakdown voltage and low power rating make it suitable for use in low-power consumer electronics, such as mobile phones and other portable devices. As such, it can be used in applications that require a steady, low-power voltage source.

The specific data is subject to PDF, and the above content is for reference