BZD27C10PHMQG

Series:	Automotive, AEC-Q101
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	10V
Tolerance:	±6%
Power - Max:	1W
Impedance (Max) (Zzt):	4 Ohms
Current - Reverse Leakage @ Vr:	7µA @ 7.5V
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 200mA
Operating Temperature:	-55°C ~ 175°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	DO-219AB
Supplier Device Package:	Sub SMA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - SingleZener diodes are diodes that operate in the reverse-bias breakdown state. As a result, they allow current to flow from their anode to their cathode in either direction. The degree to which this occurs is specified by the zener voltage (Vz). BZD27C10PHMQG is a specifically designed zener diode that is used for voltage stabilization and voltage regulation.This particular zener diode is a 10V, 250mW Zener diode. It is housed in a leadless SOD-323 surface mount package, making it suitable for high-density board designs. This device is designed to be used in circuits where the operating temperature range is between -65 and +150 degrees Celsius. It features a 5% tolerance and an operating current of 5mA.The BZD27C10PHMQG is commonly used in voltage regulating circuits. It can be used to regulate the output of a power supply, prevent over-voltage in a circuit, or to stabilize the output of a battery powered device.The working principle of this zener diode is relatively straightforward. When the applied voltage is below the zener voltage (Vz), the device behaves like a normal diode, meaning that current only flows in one direction. When the applied voltage is equal to or above the zener voltage (Vz), the device goes into a breakdown state, allowing current to flow in either direction.As the name implies, BZD27C10PHMQG is primarily used for voltage regulation or voltage stabilization. It works by allowing current to pass from anode to cathode when the voltage is above the zener voltage (Vz). The zener diode acts like a resistance, meaning that any increase in voltage is limited by the diode’s resistance. This is why it is often used to limit the output of power supplies and other DC sources.In short, BZD27C10PHMQG is a specially designed 10V, 250mW Zener diode. It can be used to regulate and stabilize outputs in power supplies, battery powered devices, and other electronic circuits. The device is housed in a leadless SOD-323 package, making it ideal for board designs that require a high degree of density. It features a 5% tolerance, a 5mA operating current, and is suitable for use in -65 Degrees to +150 Degrees Celsius.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description