BZD27C27P RQG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BZD27C27P RQG, or Zener diodes, is a special type of diode that is used for voltage regulation and can help maintain an even electric flow even when there are rapid changes in voltage. They are named after Clarence P. Zener, a pioneering scientist in the field of electronics.

Zener diodes are constructed with a thin n-type semiconductor layer sandwiched between two thicker p-type layers. The p-type layers have a higher concentration of positive charge carriers than the n-type layers. This arrangement generates a voltage gradient, which is held in place by the thicker p-type layers. The thin n-type layer acts as a barrier and prevents excessive current flow.

The BZD27C27P RQG is a single diode designed to provide overvoltage protection. It has a reverse breakdown voltage of 27V and a forward voltage drop of typically 1.2V. It is designed to dissipate at least 5 watts of power and can be used in applications such as AC-DC power supplies, DC-DC converters, and motor controllers. The RQG has a temperature coefficient of 6.0mV/K and the maximum reverse current rating is 10μA.

The working principle of Zener diodes is quite straightforward. When reverse voltage is applied to the diode, the depletion zone between the p and n portions of the diode becomes wider. This increases the electric field and causes the electrons to break down, allowing current to flow. As the voltage increases, the current increases exponentially until it reaches the breakdown voltage, at which point it levels off.

Once the breakdown voltage is reached, the Zener diode will drop very little voltage, which allows it to be used to regulate the voltage in an electric circuit. As the input voltage increases, the current through the diode increases slightly and the voltage drop remains constant (the Zener voltage). It is this property of the diode that makes it so useful for voltage regulation in a variety of applications.

The BZD27C27P RQG is a single Zener diode that is designed to provide overvoltage protection and is often used in AC-DC power supplies, DC-DC converters, and motor controllers. Its reverse breakdown voltage is 27V and it typically has a forward voltage drop of 1.2V. It is designed to dissipate at least 5 watts of power and has a temperature coefficient of 6.0mV/K and a maximum reverse current rating of 10μA. The working principle of Zener diodes is to allow current to flow through the device once the breakdown voltage is reached, allowing the diode to regulate the voltage in an electric circuit.

The specific data is subject to PDF, and the above content is for reference