BZD27C33PW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single

BZD27C33PW is a single Zener diode which offers a wide range of performance possibilities. It has a reverse breakdown voltage of 33V, with a maximum power dissipation of 500mW (0.5W). The maximum reverse current, or leakage current, is 10mA.

BZD27C33PW is widely used in a variety of applications including voltage regulation, surge protection, and peak suppression. It is also used in a variety of power management circuits such as buck/boost regulators, switch mode power supplies, and motor controllers. It can also be used in applications requiring low voltage drop, such as battery powered electronic devices, where the diode helps reduce power consumption.

Application Field

One popular application for the BZD27C33PW is in voltage regulation. By using its reverse breakdown voltage, the BZD27C33PW can be used to regulate the output voltage of a power supply circuit. This can be accomplished by connecting the diode in series with a resistor to create a voltage divider, or by using the diode in a bridge circuit.

The diode can also be used for surge protection and peak suppression. In this case, the diode is connected to a load or device that requires protection from excessive current or voltage levels. By allowing current to flow through the diode, the load or device is not exposed to the full force of the voltage or current spike.

BZD27C33PW is also commonly used in power management circuits. It can be used as a switch in a DC-DC converter circuit to regulate the output voltage, or as a switch in a buck-boost converter to regulate the input voltage. It can also be used in motor controllers and various other switching power supplies.

Working Principle

The BZD27C33PW diode is a Zener diode which works by allowing current to flow in the forward direction as normal, but then allowing a certain amount of current to flow in the reverse direction when the reverse voltage reaches a certain threshold. This reverse current is known as the Zener current, and it is the current which is used to regulate the voltage.

In a voltage regulation circuit, the resistor and the diode are connected in series to form a voltage divider. When the voltage at the output of the voltage divider reaches the reverse breakdown voltage of the diode, the diode begins to conduct in the reverse direction, allowing a certain amount of current to flow. This Zener current helps regulate the output voltage of the circuit.

In surge protection and peak suppression applications, the diode is connected in parallel to a load or device which requires protection from excessive current or voltage levels. When the voltage or current exceeds a certain threshold, the diode begins to conduct in the reverse direction, allowing current to flow through the diode and away from the load. This helps protect the load or device frombeing damaged by the excessive voltage or current.

In power management applications, the diode is used as a switch. When the input voltage rises above the reverse breakdown voltage of the diode, the diode begins to conduct in the reverse direction, allowing current to flow through the diode and switching on the power management circuit. When the input voltage drops below the reverse breakdown voltage, the diode stops conducting, allowing the power management circuit to switch off.

The BZD27C33PW is a versatile Zener diode, offering a wide range of performance possibilities for a variety of applications. Its reverse breakdown voltage of 33V, combined with its low power dissipation, make it an ideal choice for voltage regulation, surge protection, peak suppression, and power management circuits.

The specific data is subject to PDF, and the above content is for reference