BZD27C8V2PHM2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a type of semiconductor component that are basically electrically operable switches, allowing electricity to flow in one direction but not in the other. They can be used for a variety of applications including rectification, voltage referencing and signal processing. The BZD27C8V2PHM2G diode falls into the Zener single category, which means that it is specifically designed to allow current to flow in one direction and then be partially reflected back in the opposite direction. It has a particular set of applications and a simple, yet effective, working principle.

Application Field

The BZD27C8V2PHM2G diode is mainly used as a voltage reference component in circuits. It has a high breakdown voltage of 8V, which means that even when the voltage differential across it is increased, the diode will only start allowing current to pass through it once it has reached 8V. This makes it very useful in a variety of applications.

One of the most common uses of the BZD27C8V2PHM2G is as a voltage reference in low-voltage power supplies. It can provide a relatively stable reference voltage which can then be used to regulate the output of the power supply. As the voltage differential across the diode reaches 8V, it will begin to pass current through, which can then be fed back into the power supply circuit to regulate the output.

The BZD27C8V2PHM2G can also be used to protect electronic circuits from overvoltage. If the voltage across a circuit begins to increase, the diode will allow some of the excess current to flow through to avoid overvoltage. This allows sensitive components and circuits to be protected from damage caused by surges in voltage.

The diode can also be used for a variety of other purposes, such as as an input buffer for digital logic circuits, as a voltage limiter, or as a protection device for automotive electrical systems.

Working Principle

The BZD27C8V2PHM2G diode works on the same principle as any other diode. It allows current to flow through in one direction, while blocking the current in the opposite direction. In the case of the BZD27C8V2PHM2G, the voltage differential needed to turn on the diode is 8V. Once it has been reached, the diode will begin to pass current through in the direction it is faced.

The diode then acts as a voltage reference, meaning that it will only begin passing current once the voltage differential across its two terminals has reached a certain point. The current then passes through the diode and can be used for either rectification, voltage regulation, or protection from overvoltage, depending on the application.

Conclusion

The BZD27C8V2PHM2G diode is a single Zener type diode which is capable of passing current only once a certain voltage differential is reached. It is mainly used as a voltage reference or protection device in circuits. It works on the same principle as any other diode, allowing current to flow in one direction but blocking it in the opposite direction. The characteristic voltage differential that must be exceeded in order for the diode to turn on is 8V.

The specific data is subject to PDF, and the above content is for reference