BZX384C5V6-HE3-08

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are an important component of electrical and electronic circuits; they act as the ‘on-off’ switch which allows current to flow or not as needed. Zener diodes are a type of diode, distinguished from regular diodes which allow current to flow in only one direction. Zener diodes are used for voltage regulation, voltage clamping and for overvoltage protection.

BZX384C5V6-HE3-08 is a high-performance, single-package Zener diode from Diodes Inc. It is an ideal choice for variable power sources, returning power supplies, regulator designs, and for overvoltage protection. The Zener diode is designed to lower the voltage across a load during surge conditions, thus protecting the load.

The BZX384C5V6-HE3-08 has a reverse breakdown voltage of 5.6 volts and a maximum power dissipation of 500 milliwatts. It also has a maximum reverse break-down voltage of 5.6V with a 5% tolerance. The device is designed to be used in a wide range of temperature conditions, from -55°C to +150°C.

This Zener diode operates on the principle of ‘reverse breakdown’. When connected in a circuit, a Zener diode appears as an open circuit for current flowing in one direction (from anode to cathode). The diode also appears as a short circuit for current flowing in the opposite direction (from cathode to anode). When the amount of reverse current exceeds the Zener Voltage, then the Zener diode ‘breaks down’, allowing current to flow across the junction in either direction.

To regulate the voltage across a load, the BZX384C5V6-HE3-08 is connected in parallel with the load. As the voltage across the load increases, the Zener diode conducts a small amount of reverse current, thus regulating the voltage across the load by ‘clamping’ the voltage to the Zener Voltage. This is why Zener diodes are used for voltage regulation and voltage clamping.

The BZX384C5V6-HE3-08 is also used for overvoltage protection. In this application the Zener diode is connected in series with the load. This serves to limit the voltage across the load, protecting it from overvoltage conditions. The device is designed to withstand high surge voltages, and its low leakage current ensures that the load is not over-discharged when the voltage exceeds the Zener voltage.

The BZX384C5V6-HE3-08 is an ideal choice for applications where a high-performance, single-package Zener diode with good resistance to voltage transients is needed. It is suitable for variable power sources, returning power supplies, regulator designs, and for overvoltage protection. The device is also easy to use, with mounting and wiring instructions available from the manufacturer.

The specific data is subject to PDF, and the above content is for reference