BZX84B5V6-TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are components of the most basic semiconductor devices. These devices, part of the integrated circuit, allow the flow of electrical current to pass through them in one direction. Zener diodes are a type of diode that is used for maximum current/voltage regulation. The BZX84B5V6-TP is an example of a single Zener diode. The particular application field and working principle of this device will be discussed in this article.

BZX84B5V6-TP Application Field

The BZX84B5V6-TP diode is primarily used in low power, pocket-sized electronics and other similar applications. In many cases, it is ideal for voltage regulation because of its low current draw, high collector-base breakdown voltage, and its high reverse capability. Common applications for the diode include voltage regulation for batteries, mobile phone protection against partial discharge, electronic ballast for fluorescent lamps, voltage measurement and limit circuits, reverse-current protection in solar panels, and battery charger or power supply/regulator circuits.

BZX84B5V6-TP Working Principle

To understand the working principle of the BZX84B5V6-TP diode, it is necessary to first understand the properties of a diode. A diode is made up of two terminals: an anode and a cathode. An electrical current will flow through the diode, provided there is a sufficient voltage applied across it. If a high enough voltage is applied, the diode will reach a breakdown, allowing the voltage to exponentially increase until the diode is destroyed. A Zener diode, such as the BZX84B5V6-TP, will reach a breakdown voltage at a lower voltage than a standard diode, allowing it to regulate the voltage without a surge or other overvoltage.

The BZX84B5V6-TP has a breakdown voltage of 5 volts. When the forward voltage applied to the diode is lower than 5 volts, the diode will act as an open circuit, allowing little or no current through the diode. When the voltage applied to the diode is 5 volts or higher, the diode will conduct current through it. When the voltage applied to the diode is 5 volts, the diode will allow current to pass until the voltage reaches a threshold, typically avoided for safety reasons. Once the current passes this threshold, the current will start to exponentially increase, as mentioned earlier, until it saturates or destroys the diode. This protects the device against partial discharge and other overvoltage conditions.

The reverse voltage rating of the diode is also an important factor. The reverse voltage rating of the BZX84B5V6-TP is 30 volts. This means that the diode will allow current in the reverse direction up to 30 volts without sustaining damage. This is ideal for applications such as battery charging or solar panels. This prevents reverse current from damaging the device.

Conclusion

The BZX84B5V6-TP diode is an example of a single Zener diode, primarily used in low power, pocket-sized electronics. Its breakdown voltage of 5 volts and reverse voltage rating of 30 volts make it ideal for voltage regulation and for protection against partial discharge. It is also suitable for battery charging and solar panels due to its high reverse voltage rating. All of these factors make the BZX84B5V6-TP an excellent choice for electronic applications with tight voltage regulation requirements.

The specific data is subject to PDF, and the above content is for reference