CB15JB2R70

Series:	CB
Packaging:	Bulk
Part Status:	Active
Resistance:	2.7 Ohms
Tolerance:	±5%
Power (Watts):	15W
Composition:	Wirewound
Features:	Flame Proof, Moisture Resistant, Safety
Temperature Coefficient:	±500ppm/°C
Operating Temperature:	-55°C ~ 275°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.512" Square x 1.890" L (13.00mm x 48.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

• Through Hole Resistors
• CB15JB2R70 application field and working principle

A through hole resistor, commonly referred to as a THR, is a type of resistor with two leads protruding through the body of the resistor. The main advantage of this design is its ease of assembly. These resistors are suitable for the assembly of electronic components and can be used in a wide variety of applications where electrical resistance is required.The CB15JB2R70 is a through hole resistor unit with a value of 2.7 ohms. Its applications include applications such as the use of low-pass filters, active filter stages, bias stabilization circuits, and voltage regulation. It can also be used for general-purpose or high-frequency applications.The fundamental principle of resistance in general is that electrical energy encounters an opposition from it when passing through. A resistor is used to control the flow of current in a circuit, and to reduce or to increase voltage values. Its operation can be modeled mathematically using Ohm’s law, which states that the voltage and current are directly proportional to one another.When a through hole resistor is used in a circuit, the current passes through the leads of the resistor. The current is then divided between the two leads, so that most of the current will pass through the main body of the resistor. As the current passes through the resistor body, some of it is dissipated as heat, and this, in turn, causes a voltage drop across the resistor. This voltage drop results in the resistor value being applied to the circuit.The CB15JB2R70 through hole resistor has a resistance value of 2.7 ohms and a maximum current rating of 1.75 amps. The resistor can withstand a maximum operating temperature of -55°C (-67°F) to 150°C (302°F). The resistor is also suitable for high frequency applications owing to its low noise level and high PH stability. It also has excellent surge characteristics and can withstand reverse voltage up to 40 Volts.The CB15JB2R70 is an ideal choice for applications including filters, amplifiers, audio equipment, power supplies, and other electronic equipment. It is often used in power converters, transistors, and other devices. Because its two leads extend through the resistor body, it can be easily mounted onto any printed circuit board, making it ideal for quickly assembling electronic components.In conclusion, the CB15JB2R70 is an excellent choice for a variety of applications that require a through hole resistor with a value of 2.7 ohms. Its two leads extend through the resistor, making it easy to mount on circuit boards while its high voltage and current ratings make it suitable for a variety of uses. Its excellent PH stability and low noise operation make it an ideal choice for many high frequency applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description