CB15NH5224ME

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers

The CB15NH5224ME is a trimmer potentiometer, which is a special type of variable resistor produced for manual adjustments in the circuit. This type of potentiometer is usually used as part of a feedback system to adjust or trim the operating parameters of a circuit.

Applications

The CB15NH5224ME trimmer potentiometer has a number of applications, such as trimming the gain of amplifiers, adjusting the current flow in circuits, and setting the sensitivity of various sensors. It is also typically used to set the voltage or timing references for power supplies and timing circuits.

Working Principle

The CB15NH5224ME trimmer potentiometer works on the same principle as a standard variable resistor, but instead of a knob or lever that turns a shaft, the trimmer uses a small screwdriver to adjust the resistance. The resistance of the trimmer potentiometer is determined by the physical distance between the fixed contacts located at one end of the potentiometer and the wiper contact, which is attached to the adjusting screw.

When the adjusting screw is turned, the wiper contact moves along the resistive element. The further the wiper contact moves, the greater the resistance between the wiper contact and the fixed contact located at the other end of the potentiometer. This change in resistance can then be used in a circuit to adjust the operating parameters of the device.

Safety Considerations

When dealing with trimmer potentiometers, it is important to exercise caution, as the adjusting screws may become loose over time or due to mishandling. This can lead to unpredictable changes in the resistance of the trimmer and cause problems in the circuit. It is therefore important to make sure that the trimmer is securely fastened before use and to handle it with care.

Conclusion

The CB15NH5224ME is a trimmer potentiometer which can be used to adjust or trim the operating parameters of a circuit. It works similar to a standard variable resistor, but instead of a knob or lever to turn it, the trimmer uses a small screwdriver to adjust the resistance. This type of potentiometer has a number of applications, such as trimming the gain of amplifiers, adjusting the current flow in circuits and setting the sensitivity of various sensors. It is important to remember to handle the trimmer with care, as the adjusting screws may become loose over time and cause problems in the circuit.

The specific data is subject to PDF, and the above content is for reference