CBPFS-2441

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Surface acoustic wave (SAW) filters are devices that are commonly used to extract a narrow range of frequencies from a broader incoming signal. The primary use of SAW filters is in radio receivers, but they also have a host of other applications, from communications to instrumentation. The CBPFS-2441 is a popular SAW filter that has become a mainstay of electronics applications. This article will discuss the application field and working principle of the CBPFS-2441.

The CBPFS-2441 is capable of selecting frequencies from the 400-kitcheneer to 800-kitcheneer range, making this filter suitable for a number of applications. In radio applications, the CBPFS-2441 ads discrimination and enhanced signal-to-noise ratio in order to minimize errors. In music applications, this filter can be used to damp out certain harmonics of an audio signal in order to eliminate unwanted sounds. For instrumentation applications, the CBPFS-2441 can be used to monitor electrical signals in order to both increase accuracy and isolate certain frequencies.

In order to carry out its various functions, the CBPFS-2441 utilizes a multi-stage surface acoustic wave (SAW) filter array. This array of filters consists of seven identical stages, each with their own particular purpose. The first stage is an anti-aliasing filter with a cutoff frequency of 40-kHz. This filter is designed to reduce or eliminate excessive high-frequency noise in a signal. The second stage is a bandpass filter with an adjustable center frequency. This filter can be used to select a particular region of the frequency spectrum. The third stage is a set of low-pass filters, which can be used to reduce any excess high-frequency signals. The fourth stage is a set of high-pass filters, which is used to reduce the low-frequency signals that may be present. The fifth stage is a second bandpass filter, which allows for even finer tuning of the selected region. The sixth stage is a second set of low-pass filters, and the seventh stage is a second set of high-pass filters.

The CBPFS-2441 also utilizes a series of directional couplers to measure the signal strength flowing through the filter bank. These couplers allow the CBPFS-2441 to determine the amount of signal that is being attenuated at each stage. This information helps to ensure that the filter is operating as efficiently as possible. This filter can also be adjusted using the control knobs on the front of the device.

The CBPFS-2441 is an invaluable tool for any electronics engineer. Its wide range of applications and its high-quality construction make it a great choice for any project that requires the selection of a narrow band of frequencies. The CBPFS-2441’s multi-staged SAW filter array grants it the ability to finely tune a signal while rejecting any unwanted frequencies. Moreover, its directional couplers give it the ability to measure the signal strength of each stage, ensuring that the filter is operating as efficiently as possible. For these reasons, the CBPFS-2441 is an excellent choice for any electronics application requiring precise frequency selection.

The specific data is subject to PDF, and the above content is for reference