CBR1-100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bridge rectifiers are types of diodes that are known for their ability to allow alternating current (AC) to pass through them in one direction. The advantage of this is that it allows AC to be converted directly into direct current (DC). The CBR1-100 bridge rectifier is a popular bridge rectifier that is used in a wide variety of applications in the electronics industry.

The CBR1-100 is a four-terminal bridge rectifier which has two common anode connections and two common cathode connections. It is rated to handle up to a maximum voltage of 100 Volts and a maximum current of 15 Amperes. At these levels of voltage and current, the CBR1-100 can be used in many applications where a reliable DC signal is required, such as DC motors, power supplies, and various signal-processing circuits.

The CBR1-100 bridge rectifier’s working principle is quite simple. Its four terminals are connected to a rectifier circuit which converts the AC signal into a DC signal. The circuit consists of four diodes which are arranged in a bridge configuration, with the anode and cathode terminals of the diodes being connected in opposite directions. When an AC signal is applied to the bridge, the positive half-wave of the AC signal is conducted through the bridge, causing current to flow through the circuit and into the DC output terminals.

The CBR1-100 is a useful device in many applications, particularly in power conversion from AC to DC. It is suitable for uses such as in the power supplies of electronic devices, DC motor control, and signal processing circuits. The device is reliable and efficient, and can provide a high quality DC signal that is ideal for these applications.

One of the main advantages of the CBR1-100 bridge rectifier is its high power handling capabilities. It can handle up to a maximum voltage of 100 Volts and a maximum current of 15 Amperes, making it suitable for use in a variety of applications. Additionally, the device is also highly efficient, with minimal energy losses due to its part-wave rectifier configuration.

The CBR1-100 is a useful device for many applications in the electronics industry. Its four terminals are connected to a rectifier circuit that converts the incoming AC signal into a DC signal, allowing it to be used in power supplies, signal-processing circuits, and DC motor control systems. Its high power handling capabilities and high efficiency make it a reliable and efficient bridge rectifier for a variety of applications.

The specific data is subject to PDF, and the above content is for reference