CBR1-D020S TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A bridge rectifier is an electronic device used mostly in power supplies and voltage regulation and protection. The CBR1-D020S TR13 bridge rectifier is an application specific device typically used in power supplies and motors. It is a thyristor-type bridge rectifier with an impressive surge load, making it suitable for applications requiring high power.

The four diodes of the CBR1-D020S TR13 bridge rectifier connect in a full-wave configuration. This allows it to produce an output which is sinusoidal if a perfectly balanced input is applied. Due to its construction, the bridge rectifier requires two AC input power sources, one for the positive and one for the negative, to produce a full voltage output.

To understand the working principle of a bridge rectifier, we first need to understand the basic properties of a diode. It is a semiconductor device that allows current to flow in one direction only. A bridge rectifier consists of four diodes that are arranged in a closed loop. When an alternating current is applied to the diode bridge, diodes conduct in pairs to form a closed circuit. This results in half of the alternating current wave being converted into direct current. The rectified output is consequently a half-wave version of the input signal.

The CBR1-D020S TR13 bridge rectifier is built with four thyristor diodes. This allows it to handle a large amount of current. It also has a reverse current protection diode, which limits the amount of reverse current and helps protect against transient spikes. Finally, it has a noise suppression diode for reducing noise and other unwanted emissions.

The CBR1-D020S TR13 bridge rectifier is suitable for a variety of applications, including voltage regulation and power supplies in motor controllers and industrial machines. It is also frequently used in solar cell applications, as the output from solar panels must be converted from AC to DC in order to be used to power a system or device. The CBR1-D020S TR13 is designed to work reliably in harsh industrial environments, and can handle up to 1000 volts of peak input voltage.

In summary, the CBR1-D020S TR13 bridge rectifier is a thyristor bridge rectifier designed for use in industrial and solar applications. It is constructed with four thyristor diodes, a reverse current protection diode, and a noise suppression diode. Its construction allows it to handle a large amount of current, and it can handle up to 1000 volts of peak input voltage.

The specific data is subject to PDF, and the above content is for reference