CC2510F32RSPRG3

Power - Output:	1dBm
Package / Case:	36-VFQFN Exposed Pad
Operating Temperature:	-40°C ~ 85°C
Current - Transmitting:	15.5mA ~ 26mA
Current - Receiving:	14.7mA ~ 22.9mA
Voltage - Supply:	2 V ~ 3.6 V
GPIO:	21
Serial Interfaces:	I²S, SPI, USART
Memory Size:	32kB Flash, 4kB SRAM
Sensitivity:	-103dBm
Series:	--
Data Rate (Max):	500kBaud
Frequency:	2.4GHz
Modulation:	2FSK, GFSK, MSK
Protocol:	--
RF Family/Standard:	General ISM > 1GHZ
Type:	TxRx + MCU
Part Status:	Discontinued at Digi-Key
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to CC2510F32RSPRG3

CC2510F32RSPRG3 is one of the most advanced RF transceiver ICs (integrated circuits) produced by Texas Instruments. It is suitable for use with various wireless protocols in the 2.4 GHz ISM band, such as Zigbee, Bluetooth Low Energy (BLE) and Thread (802.15.4). The CC2510F32RSPRG3 operates in various power saving modes, allowing users to extend the battery life of their devices while still keeping a reliable, low-latency wireless link.

Applications

The CC2510F32RSPRG3 can be used for a wide range of applications, such as smart home and industrial automation, asset tracking, medical device communication, beacons, intrusion detection systems, and more. It is also well-suited for mesh networking as well as high data rate on-off keying (OOK) applications, and can easily be integrated in products that need wireless data transmission.The CC2510F32 also offers a number of unique features, such as an adaptive bit-rate adaptation mechanism, support for various AES encryption algorithms, and a built-in 128-bit address filter. These features make it a powerful and versatile solution for many types of wireless applications.

Features

The CC2510F32 provides a wealth of features that make it suitable for a number of different uses:• A receiver sensitivity of -105dBm for BLE, which can be improved up to -113dBm with optional enhancements. • An output power of +4dBm, which can be further increased to +17dBm with an external power amplifier. • On-chip temperature compensation, providing reliable performance across a wide range of temperatures. • A 60MHz ARM Cortex-M0 processor core included for higher data rates and reduced overall system cost.• A built-in RF switching network for efficient power output, allowing designers to maximize the power output at the antenna. • An integrated power supply, allowing designers to reduce the number of external components required.• A wide range of RF protocol support, allowing for implementation of various applications. • A rich feature set, with support for Capacitive Touch, Wake-on-Radio, Over the Air Programming, and more.

Working Principle

The working principle of the CC2510F32RSPRG3 revolves around the RF Transceiver core (also known as radio front-end) and the baseband processor. The RF transceiver core is responsible for transmitting and receiving data in the 2.4GHz ISM band, while the baseband processor handles packet processing and communication protocol functionality. In the receiving mode, the RF transceiver core receives signals in the specified band, amplifying and filtering them before delivering them to the baseband processor. The baseband processor then decodes the signals and extracts the relevant data. In the transmitting mode, the RF transceiver core takes data from the baseband processor and modulates it in order to be sent back. The antenna then sends these signals in the 2.4GHz ISM band.

Conclusion

The CC2510F32RSPRG3 is a versatile, feature-rich RF transceiver IC that is suitable for a plethora of applications in the 2.4GHz ISM band, ranging from medical device communication and asset tracking to smart home and industrial automation. It offers a robust selection of features, including a high output power, low receiver sensitivity, temperature compensation, on-chip RF switching network, and more. The working principle of the CC2510F32 relies on the RF transceiver and the baseband processor, with the RF transceiver responsible for the data transmission and baseband processor decoding the signals and extracting the data. All in all, the CC2510F32RSPRG3 makes an excellent choice for a wide variety of applications requiring reliable, low-power wireless communication.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description