CC4/3C Connectors, Interconnects

The 3C or Connector, Cable, and Connector (CCC) systems are designed to provide an efficient and economical solution for interconnecting cables and components. These systems can be used in a variety of fields, from commercial and industrial settings, to automotive, medical, and consumer applications. The 3C system is also commonly referred to as a "connector-less" system, as the three components, which make up the 3C system, are connected directly to each other, rather than requiring a connector. This eliminates the need for additional connectors, which can be expensive and difficult to install. The 3C system is made up of two components, the terminal block and jumper, and is used in applications where electrical connections are required.

The terminal block is the most important component of the 3C system. It consists of a series of pins, which are arranged in a specific arrangement and are connected to a power source. The pins are then connected to the circuit, usually with a jumper. The jumper allows the circuit to be interconnected without having to solder. The terminal block also has a variety of other types of connections, such as finger connectors and screw terminals. The number of pins in the terminal block can be determined by the required connections.

The jumper is the second component of the 3C system. It consists of a series of metal contacts that are arranged in an alternating pattern. The contacts are spaced at specific intervals and are connected to the circuit by soldering the contacts together. The jumper provides a low resistance connection between the power source and the circuit, allowing for a more efficient power transfer. The jumper also allows for easy installation of components and wiring.

The 3C system is used in a variety of applications, including automotive, consumer, medical, and industrial settings. In automotive applications, the 3C system is used to connect the vehicle\'s various components to the engine, such as the fuel injection system and the alternator. In consumer applications, the 3C system is used to connect electronic components to an DC power supply, such as stereo systems and televisions. In medical applications, the 3C system is used to connect medical devices, such as pacemakers and defibrillators, to power sources. In industrial settings, the 3C system is used to connect motors and other components to power supplies.

The 3C system is a cost effective and efficient solution for connecting components and cables. The system is easy to install and has a variety of applications. The jumper and terminal block are the two main components of the system and provide a low resistance connection between components and the power source. The 3C system is used in a variety of fields, from automotive and consumer applications to medical and industrial settings.