CD214B-R3100

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io):	3A
Voltage - Forward (Vf) (Max) @ If:	1V @ 1A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	5µA @ 100V
Capacitance @ Vr, F:	40pF @ 4V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	DO-214AA, SMB
Supplier Device Package:	SMB (DO-214AA)
Operating Temperature - Junction:	-65°C ~ 175°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The CD214B-R3100 is a single rectifier diode belonging to the CD214B family. CD214B-R3100 has a wide operating voltage of 10 to 200 volts. CD214B-R3100 also has typical reverse current leakage of 0.01 microamps. In addition, CD214B-R3100 has a high forward current rating of 3 amps which is suitable for many applications. This article will discuss the application field and the working principle of CD214B-R3100.

Application Field

CD214B-R3100 is mainly used in power line applications. It is used as a rectifier to convert alternating current (AC) to direct current (DC). This diode can also be used in bridge rectifier circuits and switched mode power supply circuits. In addition, this diode can be used in RF circuits and audio amplifier stages.

Bridge Rectifier

The bridge rectifier is one of the most common applications of CD214B-R3100. It consists of four individual diodes connected in a bridge pattern. The AC signal is applied to the input and the output consists of a pulsating DC signal. The diodes are connected in a bridge configuration in order to allow the AC signal to be converted to DC in both the positive and negative cycles of the AC input. The CD214B-R3100 is suitable for use in bridge rectifiers due to its wide operating voltage range.

Switched Mode Power Supply

A switched mode power supply (SMPS) is another application for CD214B-R3100. The diode is used in these circuits as an ON/OFF switch and is typically connected to an inductor. When the diode is switched ON, the inductor stores energy in the form of a magnetic field. The stored energy is then released into the output when the diode is switched OFF. The CD214B-R3100 is suitable for this application due to its high forward current rating.

RF Circuits

CD214B-R3100 can be used in RF circuits due to its low reverse current leakage. The reverse current of the diode is an important parameter for RF circuits as it sets the upper frequency limit of the circuit. The CD214B-R3100 has a typical reverse current leakage of 0.01 microamps which makes it suitable for use in RF circuits.

Audio Amplifier Stages

The CD214B-R3100 can be used in audio amplifier stages due to its low reverse current leakage. This parameter is important for amplifier stages as it sets the upper limit of the frequency range of the audio output. The low reverse current leakage of the CD214B-R3100 ensures that the frequency response of the output is not compromised.

Working Principle

The CD214B-R3100 is a single rectifier diode which acts as a one-way valve for current. When the anode of the diode is connected to a source of positive voltage, current flows from the anode to the cathode. However, when the polarity of the source is reversed, current does not flow. This is due to the P-N junction between the two layers of the diode.

Forward Biasing

When the anode of the diode is connected to a source of positive voltage, the P-N junction is said to be forward biased. This means that the anode is of a higher potential than the cathode. When this happens, electrons are able to flow through the P-N junction, thus allowing current to flow from the anode to the cathode.

Reverse Biasing

When the anode of the diode is connected to a source of negative voltage, the P-N junction is said to be reverse biased. This means that the anode is of a lower potential than the cathode. When this happens, the electrons are unable to flow through the P-N junction, thus preventing current from flowing from the anode to the cathode.

Captain Effect

Another factor which affects the current flow through the diode is the capacitance between the two layers. This is known as the capacitance effect, which occurs when there is a rapid change in voltage across the P-N junction. This can cause the diode to become forward biased for a very short period of time, allowing some small amount of current to flow from the anode to the cathode.

Conclusion

The CD214B-R3100 is a single rectifier diode which is suitable for use in many applications. It has a wide operating voltage range and a high forward current rating, making it suitable for use in power line applications such as bridge rectifiers and switched mode power supplies. It also has a low reverse current leakage, making it suitable for use in RF circuits and audio amplifier stages. The working principle of the diode involves the P-N junction and the capacitance effect.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description