CD40147BM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The successful application of CD40147BM in various fields, like logic-signal switches, multiplexers and decoders, is highly dependent on their working principle. CD40147BM is a 14-pin component that consists of two four-channel analog multiplexers, a dual 4 to 16 decoder and a 4-bit latch/register. Its integrated circuit design requires minimal component count and a single supply voltage.

The two four-channel analog multiplexers are the primary components of the CD40147BM. These multiplexers contain four control digital pins, labeled A, B, C and D. When digital signals are applied to these four control pins, the output of the multiplexer is connected to one of the input pins selected by the control signals. This is the basic principle of multiplexers, in which multiple analog signals or digital data can be selectively connected to single output by using a few control signals.

The dual 4 to 16 decoder on CD40147BM is a digital circuit that has four control inputs, labeled A, B, C and D. When digital signals are applied to these four control pins, the output of the decoder is a single digital signal identical to the input combination. The SET and RESET pins on the chip provide additional control of the logic levels at the output, enabling logic levels to be \'latched\'.

The 4-bit latch/register is a combinatorial logic device designed to store binary data. It consists of four flip-flops, each with an input and an output. Digital signals can be applied to the inputs of each flip-flop and the data is stored until a reset signal is applied to the register. The output pins on the latch/register provide the stored binary data.

CD40147BM can be used in many applications like logic-signal switches, multiplexers, and decoders. In a logic-signal switch application, the output of the multiplexer can be connected to one or more signals in order to selectively route signals from one part of the system to another. It can also be used as a multiplexer for connecting multiple analog signals or digital data to single output. In a decoder application, the output of the decoder can be combined with latches to control larger systems which require multiple control signals.

In summary, the CD40147BM provides an integrated circuit design that is capable of connecting multiple analog signals or digital data to single output. It consists of two four-channel analog multiplexers, a dual 4 to 16 decoder and a 4-bit latch/register. This allows it to be used in various applications like logic-signal switches, multiplexers, and decoders.

The specific data is subject to PDF, and the above content is for reference