CD4024BE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD4024BE is an integrated circuit integrated circuit counter-divider (sometimes referred to as a Decade Counter) with a single output that can be controlled by multiple input signals. It is used in circuitry that requires counting of external pulses, such as in the timing systems of televisions, computers, power supplies, and other electronic circuits.It is a relatively simple IC which consists of an array of four logic gates, a flip-flop, and a preset output register. The IC is constructed from fourteen CMOS logic gates. It uses up to 27 TTL/CMOS compatible inputs for control functions. The CD4024BE can be used to count pulses from an oscillator, a digital switch, or an external signal source, such as a sensor or other circuitry.The CD4024BE is an advanced counter-divider that operates in the following manner. The pulse input signal is input into a series of logic gates, the output of which is then fed into a flip-flop which determines the output state. The output state is then fed into a preset output register which stores the current output state and is used to prevent any further noise from interfering with the output operation.The output state is then fed back into the input of the gates, and the gates alternate states, with each gate controlling a certain output. Each gate is triggered by a pulse on a specific input. This pulse causes the output of the gate to change to a high or low value, depending on the output of the previous stage. The CD4024BE can also function as a counter-divider, as the pulses input into the gates can be divided by the number of inputs. For example, if a one second pulse is input, and there is only one input, the output will be a one second pulse at half the frequency of the input (500 milliseconds). Alternatively, if two inputs are present, the output will be a one second pulse at one quarter the frequency of the input (250 milliseconds). This is useful in digital systems that must divide incoming signals into smaller intervals.The CD4024BE can also be used as a decade counter, as the output state can be used to control the starting point of the count. When combined with two or more gates and one or more outputs, the CD4024BE can be used to perform various counting functions. In general, the CD4024BE is a versatile and easy to use integrated chip for counting, dividing, and storing incoming signals. While it is not the most sophisticated IC on the market, it is an invaluable tool for designers working on digital electronics.

The specific data is subject to PDF, and the above content is for reference