CD4047BM96 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A CD4047BM96 is a single monostable timer, multivibrator, or one-shot device. It is capable of producing accurate delays or oscillations to the user. The device is composed of two current-controlled devices connected in a cross-coupled configuration, which makes it a flip-flop. The device can be used to delay a signal, create a pulse with a given width, or create an oscillator with a frequency determined by an external resistor and capacitor.

The CD4047BM96 is a single timer or multivibrator with high precision and low power consumption. It contains an oscillator and a Schmidt trigger circuit. The oscillator consists of a ramp-generator and a control selector to get a stabilized operation. The Schmidt trigger circuit is used to produce a clean, jitter free output pulse when triggered by an input signal.

In its most basic application, the CD4047BM96 can be used to generate a clean one-shot pulse of controlled width. The trigger input is driven high or low and the output produces a pulse of width determined by the resistor/capacitor values chosen. For low-frequency frequency applications, a small capacitance and a large resistance should be used, and for higher frequency applications, a larger capacitor and a smaller resistor can be used.

CD4047BM96 can also be used in low-frequency frequency applications such as bistable switching actions. This can be accomplished by driving the input signals high then low, or low then high, at the repeated rate determined by R and C values, for example every 2 seconds. Any input level change causes the output to toggle to the opposite logic state.

The CD4047BM96 can also be used to generate an oscillation of constant frequency. This is accomplished by connecting a capacitor and a resistor between pins 1 and 6 of the chip, the output of pin 10 will be an oscillation of the frequency determined by the R and C values. A range of frequencies can be achieved by varying the values of R and C, this is particularly useful in applications where a regularly timed output is required, such as in an alarm or a strobe light.

The CD4047BM96 is ideally suited for low-power, low-maintenance, low-cost applications. It is simple to use and can be used to generate delays, pulses, or oscillations of accurate frequency. In addition, its small size and low stand-by power make it suitable for use in portable devices, such as remote control transmitters, key fob transmitters, or in battery operated applications.

The specific data is subject to PDF, and the above content is for reference