CD4047BPW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CD4047BPW application field and working principle are a part of Logic - Multivibrators. The CD4047BPW chip is a self-contained oscillator used to generate square wave signals. It has a minimum of external components so it makes it easy to use and program. It includes a two-stage differential amplifier/comparator, a voltage divider network, and a D-type flip-flop to provide a square wave at the output pin.

The CD4047BPW chip is primarily used as an oscillator in audio, alarms, and other applications. It can generate a wide range of frequencies from about 0.1 Hz to 250 kHz. It is widely used in pulse width modulation, clock and timing circuits, and other applications. The device is easy to use and program since the only necessary external components are a capacitor and resistor.

The CD4047BPW chip operates on a single 5-15 volt DC power source. It has two comparators with active-low outputs, which can be used as inverters or buffers, and a flip-flop. The HPW pin is used to control the output frequency, and the input capacitance is adjusted to control the pulse width of the output waveform. The output waveform can be in the form of a pulse, square wave, or adjustable frequency.

When the logic input is HIGH, the output at pin 12 will go LOW while the output at pin 13 remains HIGH. This causes the direction of the current to change, and the output at pin 12 returns to its original state. When the logic input is LOW, the output at pin 13 remains LOW and the output at pin 12 remains HIGH. This creates a positive cycle on the output, resulting in a square wave at the output pin.

The internal voltage divider network consists of a voltage reference and three resistors, which have adjustable tap points. These tap points can be used to control the frequency of the output waveform by adjusting the capacitor and resistor values. The resistor values can also be adjusted to vary the duty cycle of the waveforms. The frequency and duty cycle can also be programmed using the built-in waveform generator.

The CD4047BPW chip has a wide range of applications. It can be used as a basic oscillator in audio circuits, for control and timing, for pulse width modulation, in motor control and power control applications, and in many other circuits. It is also used in test equipment and in digital circuits, such as microcontrollers, to generate clock signals and waveforms. It is an easy to use chip with many applications.

The specific data is subject to PDF, and the above content is for reference