CD4060BE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD4060BE is a CMOS programmable counter/divider IC with 14 addressable stages. It is a type of IC (Integrated Circuit) typically used in industrial or home automation applications. It has been used in numerous applications, such as frequency or time division multiplexers, data converters, computer bus interfaces, clock circuits, and even as a voltage regulator. The CD4060BE is also quite popular in radio frequency circuits as well.

The CD4060BE consists of two counters, A and B, which can be connected together in toggle or non-toggle modes. The A counter is eight bits comprisingsix registers and two gates and the B counter is six bits comprising four registers and two gates. The gates can be connected to either the A or B counters, enabling users to select between the two. The CD4060BE is capable of operating at a frequency of 16MHz making it one of the fastest programmable counters available at the time of its release.

Perhaps the most prominent feature of the CD4060BE is its ability to be programmed. Programming is achieved through latching flip-flops. These devices, which are integral to the functionality of the CD4060BE, can be used to program the counter/divider either manually or electronically. Manual programming involves setting or resetting each register, while electronic programming involves the use of logic signals coming from an external source keyed in through the CD4060BE programming circuitry. The externally programmed state of the device is retained until the next reprogramming operation.

When programmed manually, the CD4060BE can be used as an asynchronous counter or divider. When counting, it can be used as an up-counter or down-counter, depending on the configuration of the inputs. For example, if the setting of the DIP switches on the IC is such that it is set for a count up operation, then it will continually increment each time the clock signal is triggered, until the maximum count of 255 (FF hex) is reached. Conversely, if the DIP switch configuration is set for a count down operation, then it will reduce the count each time the clock signal is triggered, until reaching 0.

The CD4060BE can also be programmed electronically, providing an advantage of being able to program it remotely or via a computer or microcontroller. In this type of programming mode, the device can be programmed to act either as a counter or divider and can be used to implement a wide variety of functions. For example, the device can be programmed to count up or down a set number of pulses; it can also be programmed to be data converters, time/frequency division multiplexers, and as a pulse width modulator.

The CD4060BE also has a wide range of useful applications. In communications, it can be used as a frequency divider, providing precise timing and control. In the medical field, the CD4060BE can be programmed to carry out medical monitoring such as heart rate or respiration rate. In consumer electronics, the device can be used to control or clock certain boards or components, such as LCDs or LEDs. In military applications, the CD4060BE can be used as a counter to control the operation of projectile detonation.

In summary, the CD4060BE is a powerful and versatile CMOS programmable counter/divider IC. It has a wide range of uses in both simple and complex applications and is capable of achieving high speeds and precise timing. With its ability to be programmed either electronically or manually, it has proven itself as a versatile and reliable product that can be used in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference