CD4060BM96G4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - Counters, Dividers are a category of logic devices used to count or divide signals in both digital and analog applications. The CD4060BM96G4 is a member of this category of devices which is specifically designed to offer very low power dissipation. The main application of the CD4060BM96G4 is to generate multi-frequency (pulse width modulation) signals. In addition, it can be used in various types of logic functions, such as phase shifting, clock distribution, and counting. This article will discuss the CD4060BM96G4 application field and working principle.

The CD4060BM96G4 is a low-power CMOS logic device which contains an oscillator and a ripple counter with a terminal count output. It is designed to generate a periodic signal with a frequency that is equal to the oscillator frequency divided by the number of states in the counter. It has a wide frequency range, from a few Hertz to hundreds of kilohertz. Its maximum non-repetitive pulse frequency is typically limited to the lower frequency range, with the maximum frequency increasing with power supply voltage.

The CD4060BM96G4 is a highly configurable device with a wide range of applications, including logic functions, waveform generation, and frequency division. In logic applications, it can be used to generate a logic signal from one or more input signals that are logically ANDed or ORed. Additionally, it can be used to invert logic signals, or as a multiplexer. For waveform generation applications, it can be used with waveform-shaping circuits to generate waveforms such as sine or square waves. For frequency division, it can be used to divide the frequency of an input signal by discrete powers of two.

The CD4060BM96G4 contains an oscillator, a ripple counter and a terminal count output. The oscillator is a square wave generator which is triggered by the negative-going input logic pulses applied to the oscillator enable input (OE) terminal. When enabled, the oscillator generates a square wave with a frequency determined by external components connected to the oscillator input terminals. The square wave is then fed to the ripple counter, which is a digital circuit that divides the input frequency by two sequentially until it reaches a terminal count state, at which point its output goes high.

The CD4060BM96G4 is a generic device with a wide range of possibilities, limited only by the imagination of the designer. It is used in a wide variety of applications, including logic functions, waveform generation, frequency division and frequency modulation. Its low-power consumption and wide frequency range make it suitable for a variety of applications. It is used to reduce noise and interference, as well as to increase the speed of digital systems. The CD4060BM96G4 provides a reliable and efficient design solution for many modern applications.

The specific data is subject to PDF, and the above content is for reference