CD4503BPWR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD4503BPWR is a logic buffer, driver, receiver, and transceiver. It is a logic device used in telecommunications, signal processing, and data acquisition applications. The CD4503BPWR is a 3-state noninverting buffer with on-chip pull-up and pull-down resistors. It is designed to operate up to 40MHz and is capable of driving up to +14mA or -14mA. The CD4503BPWR is designed to be operated in both a stand-alone mode and as part of a larger system. The CD4503BPWR is a single chip programmable logic integrated circuit with a CLR input. It is a medium-fast, CMOS device with a medium power dissipation of about 1.4 watts. The device is housed in the 28-pin PDIP (plastic dual in-line package).

The CD4503BPWR has two active-low inputs and two complementary active-high outputs. The two input pins are labeled A and B, and the two output pins are labeled Q and Q#. The CLR input is an active-low pin. When the CLR is low, the Q and Q# outputs are set to the high-impedance state and will not pass signals. When the CLR goes high, the outputs respond to the states of the A and B inputs.

The CD4503BPWR can be used in many applications that require the ability to drive and receive logic signals. These include communications systems, data acquisition systems, and control systems. The device is also useful for interfacing between multiple logic families, such as TTL and CMOS. The CD4503BPWR’s supported voltage ranges from 0V to 5V. The device can drive up to +14mA or –14mA, making it suitable for driving low-power devices. It has a static power dissipation of 1.4W at full power.

The CD4503BPWR is designed to be fast and reliable. It is capable of operating up to 40MHz and consumes less than 14mA of power. The device also has a low propagation delay of 5ns. This makes it suitable for applications that require fast speed and high-precision timing.

The CD4503BPWR is designed to provide the user with a versatile buffer solution. It can be used as a simple on/off switch, as a line driver, or as an amplifier. The device has an active-low CLR input, which allows for easy synchronization of the device with the other components of the system. The Q and Q# outputs can be used to drive other logic devices, such as transistors and FETs, or even other logic gates. The on-chip pull-up and pull-down resistors make it easier for the user to apply power to the device without the need for external components.

The CD4503BPWR is an excellent device for applications that require logic buffering, line driving, or signal amplification. Its low power consumption, coupled with its high speed and low propagation delay makes it suitable for a variety of high-speed applications. The device’s wide voltage range and its ability to drive a large current make it ideal for driving low-power devices, such as transistors or FETs. The powerful on-chip pull-up and pull-down resistors make the device easy to use, while the active-low CLR input allows the device to be synchronized with the system\'s other components.

The specific data is subject to PDF, and the above content is for reference