CD74AC175M96 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic flip-flops are fundamental components of digital circuits that store so-called binary logic states, 1s and 0s. These signals are key to the processing and storage of information. For application in electronic designs, it’s useful to have components that offer storage and flexibility with minimal cost, which is highly beneficial for applications where space is limited. The CD74AC175M96 is designed for these applications and offers durable performance, high speed and precision accuracy.

The CD74AC175M96 is a high-performance, inexpensive logic flip-flop that stores a single bit of digital data. It is generally used for whatever application requires memory. This component has four basic functions-set, reset, clear and enable. The set and reset pins are used to write to the flip-flop. The clear pin is used to reset the flip-flop and the enable pin is used to control the output of the flip-flop.

The internal structure of the CD74AC175M96 is based around two cross-coupled inverters, which are interconnected in a way that allows it to store binary data reliably. The circuit diagram of the component shows how these two inverters are interconnected in a direct fashion. Each pair of inverters acts as a basic latch that can be written to and read from either by a high or low logic state.

The data input is applied to both inverters via an AND gate. Essentially, an AND gate drives the output of both inverters. When the input goes high, the AND gate will provide a steady logic high state to both of the inverters. The output of one inverter is connected to the data input of the other, and this connection allows for the data to be stored for a period of time.

The clear and enable inputs of the CD74AC175M96 allow the designer to control the storage of the data. The clear input is an asynchronous signal used to reset the stored data. When the reset is applied, the output of both inverters are driven low, and the data is reset. The enable signal is used to control the output of the latched inverters. When the signal is high, both inverters outputs are actively driven high or low, depending on the previously stored data. When the enable is low, both inverters outputs are in a high-impedance state, essentially disconnected from their outputs.

The CD74AC175M96 is designed for applications where minimal components are necessary for operation. It is often used to store a single bit of binary data in logic systems or control logic states in combinational logic circuits. Thanks to its cost-effective design, the CD74AC175M96 is becoming increasingly popular among designers of digital logic designs.

The specific data is subject to PDF, and the above content is for reference