CD74AC245MG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74AC245MG4 is an 8-bit buffer driver that lets an upstream source drive several down-stream loads. This device has a data input that is buffered and driven to eight data outputs via 3-state outputs. The device can have multiple output loading and its power supply design that eliminates all latchup possibilities. The outputs are high, low, or open depending on the logic state of the data inputs and the status of the control inputs.

The CD74AC245MG4 is useful for applications including bus line drivers, transmission gates, address latches, etc. They are pin compatible with most logic and memory families, including ECL and TTL. The device is designed to switch power, logic signals, or carrier streams in data paths as directed by two control inputs, U/L and E. The U/L input controls the logic level on all output pins, while the E input controls the output modes of the device.

The working principle of the CD74AC245MG4 is simple. Data is latched on the rising edge of the device’s clock signal, and is driven out to the output buffers. The U/L input determines whether the output pins are driven HIGH or LOW, while the Enable (E) input determines whether the output pins are enabled (driven) or disabled (floating). If the E input is HIGH, the output pins are enabled, and if it is LOW, the output pins are disabled. If the U/L input is HIGH, the outputs are HIGH, and if it is LOW, the outputs are LOW.

The output pins of the CD74AC245MG4 can drive up to 24mA with a maximum of 150mA on all outputs. These buffers are designed to have a low supply current at the input to the output (5mA typ). The device is available in SOIC, TSSOP, SOP and QSOP packages for use in high-density applications. The CD74AC245MG4 also has an active-low output enable (OE), which helps to reduce power consumption.

In summary, the CD74AC245MG4 is an 8-bit buffer driver that is used in various applications. It can drive large source and load capacitances while keeping its power requirement at low levels. It uses a simple logic working principle and has two control inputs to enable and disable output pins. The device is available in multiple packages and is highly reliable in high-density applications.

The specific data is subject to PDF, and the above content is for reference