CD74HCT191E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74HCT191E is a 4-bit programmable up/down counter device with synchronous and asynchronous reset capabilities, making it a popular choice for a variety of applications. The device is part of a family of components made by Texas Instruments which, thanks to its usage of advanced high-speed CMOS logic, provides an increased level of performance over older integrated circuits.

These counters, dividers, and other logic-based devices are integral components of a wide variety of systems, from digital circuit boards and automation to computer control networks. The high speed and flexibility of the CD74HCT191E enable it to be used in a variety of data processing and control applications in the commercial, industrial, military, and aerospace fields.

The CD74HCT191E is essentially a programmable up-down counter. It has outputs representing four bit values and uses the main clock pulse signal to count up or down depending on the direction of a predefined frequency input signal. The device is essentially a sequential circuit, meaning that it reads a series of inputs in a predefined sequence and produces outputs as programmed.

The device is set up with two basic input signals, the Clock and the Direction, and two enable signals, U/D enable and Preset/Clear. The Clock signal is used to initiate a count and the Direction signal defines the direction in which the count is carried out. The U/D enable line is used to enable or disable the counter so that the counter can remain in a known state and no count is carried out. The Preset/Clear line resets the counter to the preset value in the event of an asynchronous reset.

To carry out the count, the CD74HCT191E performs a logic operation between the Clock, U/D enable, and Direction signals. Depending on the states of the Clock and U/D enable signals, the count is carried out in the direction defined by the Direction signal. This process is repeated for every pulse of the Clock input until the output is reset.The outputs of the device are configured with a 4-bit binary coded decimal (BCD) format. This means that the four outputs correspond to a 4-digit decimal count, where each output represents the values 0 to 9.

The CD74HCT191E can be programmed to count up or down with each clock cycle. When counting up, the output of the device will increment by one for each clock pulse and when counting down the output will decrement by one. It is also possible to program the device to count either up or down depending on the direction of the input clock signal. This makes the device a versatile component for applications that require various counting operations.

The CD74HCT191E can be used in a wide variety of applications, from digital clocks and alarms to medical equipment and industrial automation. The high level of flexibility and performance makes it an ideal choice for many system designs. Thanks to its use of advanced high-speed CMOS logic, it also provides improved performance compared to other integrated circuits.

The specific data is subject to PDF, and the above content is for reference