CD74HCT533E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CD74HCT533E is a standard logic family which falls under the category of latches. It is an integrated circuit containing four flip-flops coupled by a common clock input which enables it to function in both master-slave configuration and duplicated style. It is designed to provide efficient data transfer from register to register or from latches to registers, providing improved performance than the equivalent TTL devices, with a device power saving of 5V at 20MHz.

This logic family consists of 4 D-type, master-slave flip-flops with their output Qn, /Qn connected to the Dn, /Dn of the succeeding flip-flop. The common input to all the flip-flops is the clock signal. The Clock Enable (CE) input is connected to the clock input of the first flip-flop.

This logic family is used in many applications, from digital counting to multiplexing. In digital counters, the flip-flop is used to continuously store incoming data from the input register. The up/down signals are passed through to the flip-flop in order to increment/decrement the stored count. The stored count can then be retrieved from the flip-flop at the next clock period. Multiplexing applications involve transferring digital data between the register and a common data line. The output of the register is connected to the common data line and the four flip-flops are used to clocked in the data, giving four serial stages. The common data line is then connected to the input of the next register. This pattern is repeated at each stage of the multiplexing architecture giving a serial data transfer.

Internally, the positive input of each flip-flop receives data from the register, while the negative input receives data from the preceding flip-flop or register. The clock input is connected to a common clock for all four flip-flops and is controllable by the Clock Enable input. The main function of the Clock Enable input is to control the clock pulse, either allowing it or denying it from the clock input. This allows the user to control when data is transferred or stored. The outputs of the flip-flop will be either low (logic 0) or high (logic 1). The state held by the outputs will depend on the data input at the time of the active clock edge.

The CD74HCT533E integrated circuit is widely used in digitaldevices due to its high speed, low power dissipation and miniaturesize. As said before, it is commonly used in counter applications, where the data needs to be sequentially updated, and in multiplexing architectures, providing a multiplexed serial data transfer. Furthermore, it is used in circuit design as a storage device, where the stored data needs to remain intact when the circuit is not powered.

The specific data is subject to PDF, and the above content is for reference