CDBC560-HF Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Single

CDBC560-HF application field and working principle mainly focus on the study of single diodes, rectifier and its application field. The CDBC560-HF silicon-controlled rectifier series is a high-power SCR application which covers a broad range of SCR ratings. It is intended primarily for AC off-state snubbing, inrush control and current limitation, as well as other industrial applications.

The CDBC560-HF series SCRs operate in single-phase or multiple-phase configurations depending on the gate voltage and current. It features an internally triggered SCR gate circuit with a wide range of triggering and hold offset voltages. The CDBC560-HF series SCRs have a three-quadrant triggering drive capability, in addition to a two-quadrant configuration for noise reduction.

When triggered, the SCR operates with a low turn-on voltage and fast turn-on time. The CDBC560-HF series SCRs are used for blocking and unblocking currents, for controlling the speed and direction of motors, for controlling large circuits and for controlling small circuits. The SCR is used for reverse blocking and burst-type AC control.

In terms of the construction of CDBC560-HF, it consists of P-N junction diodes connected to three terminals: anode, cathode and gate. It is also installed on a printed circuit board as a component of the electronic circuit. It is constructed with an intrinsic or built-in voltage gain in the same direction. When the gate voltage is zero, the current flow in the device is blocked and no current can flow through it. However, when a positive voltage is applied to the gate terminal, a control current will flow through the P-N junction causing a voltage gain and turning the SCR on. In the on state, the current between the anode and the cathode continues to rise until it is limited by the external circuit.

The maximum current rating for the CDBC560-HF device is based on the need to avoid overloading and current limitation. Heavy overloading of the device will reduce its life expectancy and compromise its performance. Overload protection, temperature monitoring, user current selectivity and voltage isolation are some other important factors that should be taken into consideration when selecting SCRs.

The CDBC560-HF series SCRs can be used in a variety of applications such as AC motor start/stop controls, DC motor speed controls, heating and lighting controls, welding rectifier controls and solar power applications such as inverters. In addition to these, the CDBC560-HF series SCRs can also be used for process control, automotive applications and communication systems. Overall, the CDBC560-HF series SCRs are extremely versatile devices suitable for a wide variety of industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference