Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	40V
Current - Average Rectified (Io):	100mA
Voltage - Forward (Vf) (Max) @ If:	550mV @ 100mA
Speed:	Small Signal =
Current - Reverse Leakage @ Vr:	30µA @ 10V
Capacitance @ Vr, F:	--
Mounting Type:	Surface Mount
Package / Case:	0503 (1308 Metric)
Supplier Device Package:	0503/SOD-723F
Operating Temperature - Junction:	125°C (Max)
Base Part Number:	CDBER0140

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

A single diode rectifier called CDBER0140L-HF is widely used in power electronics applications due to its high frequency and high voltage performance. A rectifier is an electrical component that converts AC (alternating current) signals into DC (direct current) signals. The CDBER0140L-HF is a type of single diode rectifier. It operates at high frequencies (up to 1.4 MHz) and high voltages (up to 40 volts peak). It is useful in applications such as rectifying ac-dc converters, solar power supplies, and power supplies.

Applications

The CDBER0140L-HF can be used in many power electronics applications including ac-dc converters, solar power supplies, and switching power supplies.

AC-DC Converters

AC-DC converters are used to convert alternating current (AC) signals into direct current (DC) signals. The CDBER0140L-HF can be used in these applications to rectify the AC signal and produce a DC output.

Solar Power Supplies

Solar power supplies are used to convert the direct current (DC) output of a solar panel into an alternating current (AC) output. The CDBER0140L-HF can be used to rectify the AC signal that is output by the solar panel and convert it into a DC signal for the power supply.

Switching Power Supplies

Switching power supplies are used to convert an input voltage to the desired output voltage. The CDBER0140L-HF can be used to rectify the incoming AC signal and convert it to a DC signal for the power supply.

Working Principle

A single diode rectifier is one of the simplest circuits used to rectify AC signals. It consists of a diode and two terminals, one positive and one negative. When an AC voltage is applied to the terminals of the rectifier, the diode allows only one half of the waveform to pass through and the other half is blocked. This causes the AC signal to be converted into a pulsating DC signal.

Conclusion

The CDBER0140L-HF is a single diode rectifier that is used in a variety of power electronics applications such as ac-dc converters, solar power supplies, and switching power supplies. It operates at high frequencies (up to 1.4 MHz) and high voltages (up to 40 volts peak). The rectifier works by allowing only one half of the waveform to pass through, which creates a pulsating DC signal.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description