CDC1104RVKR

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Buffer/Driver
Number of Circuits:	1
Ratio - Input:Output:	1:4
Differential - Input:Output:	No/No
Input:	TTL
Output:	TTL
Frequency - Max:	120Hz
Voltage - Supply:	3.8 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	--
Supplier Device Package:	12-WQFN (3x3)
Base Part Number:	CDC1104

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Introduction

The CDC1104RVKR is a Clock Buffer, Driver, used in many different industries. The device is designed to increase the drive capability of its input signal, allowing it to drive items such as memories and system clocks. The device has an output that is higher than the input, so it acts as an amplifier or buffer. This device can also be used to reduce peak voltage, supply rail ringing, and restore noise immunity. The device is available in both wide and narrow packaging, allowing for custom-tailored solutions for a range of applications.

Application Fields

The CDC1104RVKR can be used in clock distribution networks, such as synchronous and asynchronous systems. It is also used in frequency synthesizers and memory systems, to help distribute a clock signal. It can be used in communications equipment, including general office communication networks and fiber optics systems. Other applications include in consumer electronics, industrial network clocks, medical systems and automotive timing requirements.

Working Principle

The CDC1104RVKR works by converting an input clock signal into an amplified output. When the input signal is low, the output is held high, allowing the output driver stage to be activated. In the activation phase, the buffer increases the voltage level of the output signal, and then it is divided or reduced according to the system requirements. The device supports adjustable rise and fall times of the output, allowing the system to tailor the output clock waveform to meet the application demands.When the output signal is typically in the off-state, the circuit input impedance is very high and the output load is not affected. This low-impedance open loop of the device allows the output to stay high with no load current. This leads to an energy saving, as current is not being used to maintain the output voltage.The device also has a very low static power consumption, as the static currents are minimized. This helps to reduce the cooling requirements, thus resulting in a more efficient and reliable system.

Conclusion

The CDC1104RVKR is a clock buffer, driver, used in many different areas. It is designed to increase the drive capability of its input signal, and can be used in clock distribution networks, memory systems, communications equipment, consumer electronics, industrial networks, medical systems, and automotive timing requirements. The device works by converting an input clock signal into an amplified output, while also offering adjustable rise and fall times of the output, and a low static power consumption.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description