CDCVF855PWG4

Differential - Input:Output:	Yes/Yes
Base Part Number:	CDCVF855
Supplier Device Package:	28-TSSOP
Package / Case:	28-TSSOP (0.173", 4.40mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply:	2.3 V ~ 2.7 V
Divider/Multiplier:	No/No
Frequency - Max:	220MHz
Series:	--
Ratio - Input:Output:	2:5
Number of Circuits:	1
Output:	SSTL-2
Input:	SSTL-2
PLL:	Yes with Bypass
Type:	PLL Clock Driver
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction CDCVF855PWG4 is a clock synthesizer IC with low jitter and high quality outputs. It is part of the Clock/Timing - Clock Generators, PLLs, Frequency Synthesizers family, which provides clock generation, clock data recovery and logic implementations.Overview of the CDCVF855PWG4The CDCVF855PWG4 is a low jitter clock synthesizer IC designed to produce high quality clock and data outputs. The IC operates from 1.8 V to 3.6 V supplies, with a wide selection of output frequencies and drive strength.The IC is based on an on-chip oscillator that is programmed and locked to the input reference frequency, and then the output signal is generated. The input reference can be a crystal or external signal, or an external clock or logic signal. The output frequency is then generated from the reference clock and can be controlled via a serial port.Features and Benefits The CDCVF855PWG4 provides a number of features and benefits, making it an ideal solution for clock and data recovery applications.• Low jitter output: the clock and data output signals are generated with low jitter, making the device ideal for high speed applications. • Wide range of output frequencies: the IC can produce output frequencies ranging from 8 KHz to 375 MHz.• Wide selection of drive strength: the IC can be programmed to provide output signals with drive strength of either 8 mA or 16 mA.• Programmable clock recovery: the IC can be programmed to provide programmable clock recovery, enabling it to provide the necessary clock recovery in high speed applications.• Serial programming interface: the IC can be programmed and controlled via a serial port, making it easier to configure and integrate into systems.In addition to the features and benefits mentioned above, the IC also supports a wide variety of functions, such as programmable frequency and drive strength, programmable clock recovery, and power-down mode. Applications of the CDCVF855PWG4 The CDCVF855PWG4 is ideally suited for a wide range of applications. It is particularly well suited for high speed applications, such as communications systems, high speed FPGAs and ASICs, high speed memory systems, and clock and data recovery.The IC can also be used in high density networks and data storage applications, as well as in medical imaging systems, automotive applications, low power products and aerospace systems.Working Principle The working principle of the CDCVF855PWG4 is based on a phase-locked loop (PLL) circuit. The PLL is a type of circuit that uses feedback to maintain a constant phase relationship between two oscillators.In the case of the CDCVF855PWG4, the input reference clock is locked to the oscillator of the IC. The output signal is then generated from the reference clock and is either a sinusoidal wave (clock) or a digital data stream (data).The output can be programmed via a serial port, enabling fine-tuning of the output frequency and drive strength. The IC can also be programmed to provide programmable clock recovery, enabling it to provide the necessary clock recovery in high speed applications.Conclusion The CDCVF855PWG4 is a low jitter clock synthesizer IC that is part of the Clock/Timing - Clock Generators, PLLs, Frequency Synthesizers family. The IC can produce clock and data outputs with low jitter, and can be programmed to provide programmable clock recovery and drive strength.The IC is ideally suited for high speed applications, such as communications systems, high speed FPGAs and ASICs, high speed memory systems, and clock and data recovery. It can also be used in high density networks, data storage applications, and a variety of other applications.The working principle of the IC is based on a PLL circuit, whereby the input reference clock is locked to the on-chip oscillator, and the output generated from the reference clock. This output can be programmed and controlled via a serial port, enabling fine tuning of the output.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description