CDLL5244B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CDLL5244B can be classified as a diode-zener single due to its characteristics and typical applications. Basically, these diodes are designed to regulate voltages. The components breakdown voltage is specified and the temperature coefficient is very low. Due to this, they are particularly suitable for use in applications which require low noise, good linearity and stability over a wide range of temperature changes.

The CDLL5244B device has two main applications. First, it is used as a voltage-regulator diode in low-voltage regulation, and is most suitable for a range of 5.2 to 12V applications. Second, it is used as an overvoltage protector and power clamp, in circuit designs using high voltage input/output. It should be noted that the breakdown voltage of the diode is temperature dependent and is given in the device specifications.

Concerning the working principle of the device, first it should be noted that a small current always passes through a Zener diode, regardless of the external circuit. This is known as the Zener breakdown. When the external circuit voltage increases, the device remains in the `On\' state and a small current still passes through it due to the Zener breakdown. When the external circuit voltage reduces, the device remains in the `Off\' state and no current passes through it.

Regarding the device itself, to fully understand its working principle the basic structure of a Zener diode must be studied. All Zener diodes consist of a PN junction diode, which is made of two semiconductor materials, where one material has more positive charges and the other one has more negative charges. When the diode is reverse biased, an electric field is created at the junction and a strong depletion region is formed. The width of this depletion region depends on the level of the applied voltage, and when the reverse bias voltage reaches a certain level the electric field at the junction becomes so strong that it causes the electrons and holes to `breakdown\' and cross the junction. This phenomenon is known as Zener Breakdown Voltage. The CDLL5244B has a Zener breakdown voltage of 5.2 volts.

The operating temperature range specified for the CDLL5244B is -65 to +150 degrees Celsius. This device is usually offered in an SOT-223 package and its maximum power dissipation is 500mW, meaning that the safe power dissipation it can handle is limited. Despite these limits, the device can safely handle transient power surges and dissipates up to 1W. The maximum reverse voltage, also known as Clamping Voltage, of the device is 28 volts and it is important to keep it below the specified limit during operation.

In summary, the CDLL5244B can be classified as a diode-zener single. It is primarily used as a voltage-regulator, low-voltage regulator, over-voltage protector and power clamp. Its Zener Breakdown Voltage is specified as 5.2V, and its Clamping Voltage is 28V. These values are temperature dependent and must be taken into account while using the device. Safe power dissipation conditions must also be followed to prevent any unforeseen damage.

The specific data is subject to PDF, and the above content is for reference