CDLL5956C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CDLL5956C, a single Zener diode, is a device with a large-area die whose purpose is to limit the maximum amount of current in an electronic circuit by providing a precise reference voltage. Zener diodes have the ability to regulate the voltage in a circuit by allowing current to flow in one direction while blocking the current in the other direction if it exceeds the Zener voltage. This makes it an ideal device for applications that require precision regulation of a voltage while still providing protection against over-voltage conditions.

The CDLL5956C is designed to provide low leakage current, fast switching speed, and a wide temperature operating range. It has a reverse breakdown voltage of 5.9 V, and a forward voltage drop of 4.7 V. The maximum power dissipation of the device is 500 mW, and peak repetitive reverse voltage of 6 V. This Zener diode can be found in a variety of applications, including voltage regulators, surge protection devices, and in digital logic circuits.

The main function of a CDLL5956C is to provide a reference voltage in a circuit. The Zener diode acts as a voltage regulator and can be used to provide a constant voltage source in a circuit. In the most common application, the Zener diode is connected in series with a resistor between the power supply and the load. When the voltage across the resistor rises above the Zener voltage, the diode will conduct current, which helps protect the load from over-voltage conditions. The resistor is used to maintain a low current through the diode, so that it operates properly as an open circuit.

Another common use for CDLL5956C is as a voltage discriminator. In this application, the Zener diode is used in conjunction with an AC input voltage to create a constant output voltage. When the input voltage is higher than the Zener voltage, the Zener diode will become forward biased and conduct current. This causes the output voltage to remain constant. If the input voltage drops below the Zener voltage, the diode will become reverse biased and stop conducting current.

The CDLL5956C can also be used for voltage dropping applications. The diode can be used in a power supply to drop the input voltage to a lower level, which is then output to the load. In this application, the Zener diode is connected in series with the voltage source. The current that passes through the diode will be limited to the Zener voltage, and the voltage across the load will be the Zener voltage minus the voltage drop across the diode.

The CDLL5956C is also used in diode clipping circuits, which can be used to limit the maximum peak-to-peak voltage of an AC signal. In this application, the diode will conduct when the input voltage reaches the minimum Zener voltage and then it will be reversed biased and stop conducting when the voltage rises above the Zener voltage. This limits the peak-to-peak voltage of the signal.

In addition to the common applications mentioned above, CDLL5956C can also be used for other applications such as temperature sensing, over-voltage protection, and for sharpening audio signals. The CDLL5956C is a great choice for any application where precision and reliability are needed. Finding the right Zener diode for your application requires a careful analysis of the voltage and power needs of your circuit.

The specific data is subject to PDF, and the above content is for reference